Side arm brush cutter for tractor Deleks AIRONE-60
The Side arm brush cutter Deleks AIRONE-60 It is specially designed for tractors with a power of 20-60HP. This brush cutter model is used to cut grass on the edges of roads with limited accessibility or within parks.
The model Deleks AIRONE-60 It is designed for pruning trees and hedges with a maximum diameter of 2 to 3 cm. It can also be used for cutting shrubs as this model features 24 blades with a hole dimension of 13 mm.
This Brush cutter of/from Deleks It also features a Hydrocontrol hydraulic distributor manufactured in Italy. Additionally, it is equipped with a double Casappa hydraulic pump, also manufactured in Italy, which allows the arm to move while cutting simultaneously.
The AIRONE-60 Brush Cutter comes with CE gimbal included, it also includes a Casappa hydraulic motor. The implement can be used on low-power tractors in gardens and orchards.
The model of AIRONE-60 Brush Cutter Deleks It offers us a large oil tank, with a capacity of 55 L, already at the Shell Tellus 46 S2 MX 46 level. It has a lightweight of 265 kg, which allows the model to be used in orchards.
This model of Brush cutter Deleks It guarantees the operator good comfort and ease of work. This is thanks to its notable features.
Among these features, we can highlight the working width of 600mm and the total width of 1200mm. We can also highlight the adjustable cutting diameter from 20 to 80mm and the total height of 2010mm.
Characteristics
| Working width |
600 mm |
| Total width |
1200 mm (closed) |
| Minimum/maximum cutting height |
20 - 80 mm |
| Weight |
265 kg |
| Total height |
2010 mm |
| Tractor power |
20-60 HP |
| Three-point hitch |
Cat. 1 (ø 19-22mm) |
| Height of the hood |
330 mm |
| Distance between the lower points |
470 - 570 mm |
| Maximum cutting diameter |
15 mm |
| Total length |
1070 mm |
| Space between the ground and the transmission box |
400 mm |
| Thickness of the sheet |
4 mm |
| Type of transmission |
Hydraulics |
| Transmission: PTO |
540 rpm (revolutions per minute) |
| Transmission: direction of rotation |
Schedule |
| Transmission: freewheel |
√ |
| Transmission: rotor speed |
1500 rpm (revolutions per minute) |
| Transmission: gearbox oil |
Yes / SAE 120 - ISO 72925 |
| Rotor: diameter |
78 mm |
| Rotor: type of bearings and dimension |
GB276-6007 |
| Rotor: balancing |
Electronic |
| Rotor: blade thickness |
14 mm |
| Roll: diameter |
102 mm |
| Roll: sheet thickness |
4 mm |
| Roll: type of bearings and dimension |
φ25 |
| Hydraulic tubes |
WP 400 Bar |
| Cardan |
CE 4x700 mm |
| Length of the hood |
650 mm |
| Number of slats |
24 |
| Lamas: Weight |
130 g |
| Lamas: ø hole |
13 mm |
| Displacement |
2710 mm |
| Transmission: gearbox oil |
55 liters |
| Cucillos: base width |
50 mm |
| Cucillos: diagonal |
85 mm |
| Packaging dimension |
1280*800*2150 mm |
| IMPORTANT NOTICE |
|
| Mandatory on the part of the client, review oil levels and lubrication before startup. If the goods cannot be checked at the time of receipt, it should be noted on the carrier's sheet that the customer is in agreement. except for pending exam. |
