Modern Tractor Lovol M754C DOOSAN EURO 5 engine
- Standard emissions : Stage V / EPA4F
- Power : 55 kW / 75 HP
- Metering speed : 2400 r/min
€49,934.98 VAT incl.
The fieldtrac 927 mini tractor has a four-stroke, four-cylinder diesel engine capable of delivering a 24 HP power at a nominal rate of 2700 RPM. Engine complies with emission standards Stage-V and its displacement is 1306 cc.
The gearbox of this mini tractor is mechanically synchronized and has 8 speeds of which 6 are forward and two are reverse. It also has the rear differential lock and its brakes are drum type.
This mini tractor is equipped with electric start driven by a 12 V 2 kW starter motor that draws its energy from a 12 V 70 Ah battery. In addition, Fieldtrac 927 comes equipped with a cAT-1 N 3-point linkage.
Finally, we would like to comment that the mini diesel tractor Fieldtrac 927 is equipped as standard with a battery cut-off switch as well as a adjustable driver's seat. In terms of weight, the machine weighs 950 kilograms and the wheelbase is 1420 mm.
MOTOR | |
Model | V4D1E5 |
Emission standard | Stage-V |
Type | 4-stroke diesel, naturally aspirated, water-cooled, high torque |
No. of cylinders | 4 |
Engine power | 24 HP |
PTO (HP) | 20 |
Nominal RPM | 2700 |
Diameter and stroke | 73 x 78 mm |
Displacement | 1306 cc |
Air Purifier | Dry type double filter |
Fuel tank capacity | 18 liters |
TRANSMISSION | |
Clutch | Individual Dry |
Gearbox type | Synchronized mechanics |
No. of Gears | 6F+2R |
Gearshift position | Lateral displacement |
Speed Range-Km/h |
|
Differential Lock (Rear) | Standard |
Brake Type | Dry Drum |
Transmission Type | 4WD |
PTO (rpm) | 540 and 1000 RPM |
ELECTRICITY | |
Battery | 12 V, 70 AH, (700 CCA) |
Headlight | 4 Projector Lamps |
Starting System | Starter Motor 12 V, 2 KW |
Alternator | 12V, 35 AMP |
HYDRAULIC SYSTEM | |
Type of control | ADDC |
Pump Capacity | 12.9 LPM |
Maximum Lift Capacity | 500 Kg |
3-Point Hitch | CAT-1 N |
Steering System | Hydraulic Power Steering |
Rear Coil Value | 2 Values with Quick Coupling |
DIMENSIONS AND OTHER FEATURES | |
Overall Dimensions (LxBxH) with TPL and Front Ballast | 2870 x 1150 x 2075 mm |
Ground Clearance | 230 mm |
Turning Radius | 2.3 meters |
Weight | 950 Kg |
Distance Between Axes | 1420 mm |
Via de las Ruedas |
|
Front Weight/ Ballast (standard) | 60 Kg |
Rear Wheel Ballast (optional) | 60 Kg |
Tire Options (Front and Rear Size) |
|
Driver's Seat | European Design Adjustable Seat |
Operating Environment | 10 - 45ºC |
Mobile Recharging Point | Yes |
Muffler (Under Hood) | Yes |
Battery Cut-Off Switch | Yes |
ROPS | Yes |
Drawbar | Optional |
Hitch Assembly | Yes |
Hood Lock with Special Key | Yes |
IMPORTANT NOTICE |
Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
Specific References
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips.
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.