| Deleks products take about 15 to 25 days. |
The Arm brush cutter Deleks ELK-200 It is specially designed for tractors with a power of 70-110HP. This brushcutter model is used for meadows, gardens, and vineyards.
The model Deleks ELK-200 It is designed for cutting grass and brambles up to 4 cm in diameter. It is ideal for roadside edges. It can also be used for cutting shrubs as it tilts around 90 degrees upwards and 60 degrees downwards.
This Crusher of Deleks also includes a CAT 2 universal 3-point hitch. Regarding its features, we can highlight its good Lombarda Ingranaggi transmission box made in Italy with a freewheel.
The ALCE-200 Brush Cutter comes with CE gimbal included, it also includes an electronically balanced rotor. The implement can be used on low-power tractors in gardens and orchards. It has a weight of 640 kg.
This model of Arm brush cutter Deleks It guarantees the operator good comfort and ease of work. This is thanks to its notable features.
Among these features, we can highlight the working width of 1995mm and the Total width of 2390 mm. We can also highlight the adjustable cutting height from 35 to 95mm and the total height of 115mm.
| Working width | 1995 mm |
| Total width | 2390 mm |
| Minimum/maximum cutting height | 35 - 95 mm |
| Weight | 690 kg |
| Total height | 1150 mm |
| Tractor power | 70 - 110 HP |
| Three-point hitch | Cat. 2 (ø 25.0-28.0 mm) |
| Position of the transmission box | External |
| Height of the hood | 470 mm |
| Distance between the lower points | 840 - 970 mm |
| Number of hammers | 18 |
| Maximum cutting diameter | 40-50 mm |
| Total length | 1750 mm (closed) |
| Space between the ground and the transmission box | 650 mm |
| Thickness of the sheet | 5 mm + reinforcements |
| Thickness of the sheet on the sides | 8 mm |
| Thickness of the skates | 8 mm |
| Type of transmission | Correas V |
| Transmission: Gearbox | Lombarda Ingranaggi Srl |
| Transmission: PTO | 540 rpm (revolutions per minute) |
| Transmission: direction of rotation | Schedule |
| Transmission: freewheel | √ |
| Transmission: rotor speed | 2134 rpm |
| Transmission: gearbox oil | Yes / SAE 120 - ISO 72925 |
| Transmission: diameter of the upper pulley | 220 mm |
| Transmission: diameter of the lower pulley | 165 mm |
| Transmission: number of cores | 4 |
| Transmission: dimensions of the Koreas | 17x1300 |
| Rotor: diameter | 152 mm |
| Rotor: type of bearings and dimension | 40x90 |
| Rotor: balancing | Electronic |
| Rotor: blade thickness | 8 mm |
| Hammers: weight | 1100 g |
| Hammers: ø hole | 16 mm |
| Hammers: base width | 140 mm |
| Hammers: head width | 40 mm |
| Hammers: diagonal | 97 mm |
| Roll: diameter | 152 mm |
| Roll: sheet thickness | 6 mm |
| Roll: type of bearings and dimension | 90x40 mm - GB276-6308 |
| Displacement and dimensions | View photos |
| ø Hydraulic Cylinder A | 80-35 mm |
| ø Hydraulic Cylinder B | 60-30 mm |
| Minimum/maximum oil pressure | 120 - 150 bar |
| Optimal oil flow | 18 - 22 l/min |
| Hydraulic tubes | WP 400 Bar, 1/2" Agri Standard |
| Cardan | CE 5x1800 mm |
| Length of the hood | 770 mm |
| Packaging dimension | 2400*1000*1000 mm |
| IMPORTANT NOTICE |
| Mandatory on the part of the client, review oil levels and lubrication before startup. If the goods cannot be checked at the time of receipt, it should be noted on the carrier's sheet that the customer is in agreement. except for pending exam. |
Data sheet
Specific References
