Hammer crusher for tractor DELEKS DRAGON
- Working width 1795 - 2195 mm
- 540 RPM
- Power 80 - 130 HP
- Hammers 16 - 24
CARDAN SHAFT INCLUDED
Deleks products take about 15 to 30 days. |
DELEKS DRAGON Tractor Hammermill Crusher
DELEKS DRAGON Tractor Hammermill CrusherIs designed for professionals, specializing in pruning lawns, brambles and pruning up to 4 - 5 cm in diameter. This model can be tilted to more than 90 degrees and less than 60 degrees, for clearing the edges of a pond, for example.
This brushcutter works for tractors that have with power ratings from 80 to 130 HP, has a category 2 three-point hitch with a hydraulic displacement and a 180 cm CE wide-angle gimbal.
The brushcutter hydraulic pistons are used for the the larger size, in addition to having a locking valve, has a double housing, an oil flow regulating valve, and bearings with nSK branded rotor made in japan.
Your gearbox is outside the chassis to maximize its lateral displacement, this box contains 540 r/min with freewheel, its conception is heavy and robust for a better professional use, this brushcutter can work horizontally on the tractor axle and laterally for orchards.
It has 5 heavy duty straps which can be externally tensioned, and a 152 mm rear roller and adjustable side skids.
Features
Model | DRAGON 180 | DRAGON 200 | DRAGON 220 |
Working width | 1795.0 mm | 1995.0 mm | 2195.0 mm |
Overall width | 2190.0 mm | 2390.0 mm | 2590.0 mm |
Tractor power | 80 - 130 HP | 90 - 130 HP | 90 - 130 HP |
Weight | 750.0 kg | 780.0 kg | 815.0 kg |
Number of hammers | 16 | 18 | 20 |
Transmission type | V-belts | V-belts | V-belts |
Cutting height min/max | 35.0 - 95.0 mm | ||
Total height | 1150.0 mm | ||
3-point hitch | Cat. 2 (ø 25.0-28.0 mm) | ||
Position of the gearbox | External | ||
Hood height | 470.0 mm | ||
Distance between the lower points | 840.0 - 970.0 mm | ||
Max. cutting diameter | 40.0-50.0 mm | ||
Total length | 1750.0 mm (closed) | ||
Ground to gearbox spacing | 650.0 mm | ||
Plate thickness | 5.0 mm + reinforcements | ||
Thickness of sheet metal on the sides | 10.0 mm | ||
Skid thickness | 8.0 mm | ||
Transmission: Gearbox | Lombarda Ingranaggi Srl (Warranty 3 years) | ||
Transmission: PTO | 540 r/min | ||
Transmission: direction of rotation | Schedule | ||
Transmission: freewheel | √ | ||
Transmission: rotor speed | 2134 rpm | ||
Transmission: gearbox oil | Yes / SAE 120 - ISO 72925 | ||
Transmission: number of Koreas | 5 | ||
Transmission: diameter of upper pulley | 220.0 mm | ||
Transmission: lower pulley diameter | 165.0 mm | ||
Transmission: dimensions of the Koreas | 17x1300 | ||
Rotor: diameter | 168.0 mm | ||
Rotor: bearing type and dimension | NSK 22309 | ||
Rotor: balancing | Electronic | ||
Rotor: blade thickness | 8.0 mm | ||
Hammers: weight | 1100.0 g | ||
Hammers: hole dia | 16.0 mm | ||
Hammers: base width | 140.0 mm | ||
Hammers: head width | 40.0 mm | ||
Hammers: diagonal | 97.0 mm | ||
Roll: diameter | 152.0 mm | ||
Roll: sheet thickness | 6.0 mm | ||
Roll: bearing type and dimension | 90x40 mm - GB276-6308 | ||
ø Hydraulic Cylinder A | 80.0-35.0 mm | ||
ø Hydraulic Cylinder B | 60.0-30.0 mm | ||
Oil pressure min/max | 120 - 150 bar | ||
Optimal oil flow | 18 - 22 l/min | ||
Hydraulic hoses | WP 400 Bar, 1/2" Agri Standard | ||
Cardan | CE 6x1000 mm | ||
Hood length | 770.0 mm | ||
Packing dimensions | 220 x 100 x 100 cm | 240 x 100 x 100 cm | 260 x 100 x 100 cm |
IMPORTANT NOTICE |
Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
- Shredder type
- Shredder with side arm
- Type of cut
- Hammers
- Working width PTO
- 180 - 220 cm
- Tractor power
- 80 - 120 HP
- Cardan shaft
- Included
- Type of coupling
- Pantograph displacement
- Displacement
- Hydraulic
- Robustness
- Heavy
- Number of hammers
- 16 - 24
- Working width (cm)
- 180 - 189 cm
200 - 209 cm
220 - 229 cm - Country of manufacture
- Italy
- Weight
- 750 - 815 kg
Specific References
- ean13
- 8053470239557
✔️ Advantages of making purchases in the Spanish territory
- National warranty: By purchasing from authorized distributors throughout Spain, you are assured of receiving a 100% Spanish warranty for your products.
- Local after-sales service: In case of any inconvenience or need for after-sales service, you will have a more efficient and accessible support when purchasing within Spain.
❌ Disadvantages of buying outside Spanish territory
- Complicated warranty management: Buying products outside Spain can make warranty management difficult, as there may be problems with the Spanish serial number or delays in the process.
- Limited after-sales service: The availability of after-sales service may be limited or less accessible when purchasing products abroad.
- Tax declaration: When purchasing products outside Spain, customers may be required to make an additional tax declaration, such as an intra-community purchase, which may involve additional tax formalities.
Review
5 other products
Hammer crusher for tractor Deleks LEOPARD-140-SP 30-70HP
- Tractor power: 30 - 70 HP
- Cutting height: 10 - 45 mm
- Total width: 1540.5 mm
- Number of hammers: 20
€2,424.00 VAT incl.
Hammer crusher for tractor Deleks LEOPARD-180 40-70HP
- Tractor power: 40 - 70 HP
- Cutting height: 10 - 45 mm
- Total width: 1991.5 mm
- Number of hammers: 28
€2,596.59 VAT incl.
PTO Shredder GEO ITALY EFGCH hydraulic shift 125-175 cm
- Weight : 240 - 315 kg
- Power Supply pTO tractor
- Working width PTO : 125 - 175 cm
- Cardan shaft : Yes
- Robustness : Medium-Light
- Min. tractor power : 20 - 60 HP
- Number of hammers : 20 - 28
- Country of manufacture : Italy
CARDAN SHAFT INCLUDED
€2,048.60 VAT incl.
Standard Hydraulic Inter-row Shredder Dimago 540 RPM
- Working width PTO 1,55 m - 1,75 m
- Working width 1,75 m - 1-95 m
- Hydraulic displacement
- Cutting system Hammers
€4,184.13 VAT incl.
Hammer crusher for tractor Deleks LEOPARD-160-SP 40-70HP
- Tractor power: 40 - 70 HP
- Cutting height: 10 - 45 mm
- Total width: 1740.5 mm
- Number of hammers: 24
€2,496.72 VAT incl.
Product Reviews / Q&A
-
Reviews (0)
-
Questions & Answers (0)
-
Latest
-
Latest