The Garland Bull 861QG has 6 groups of cutters with 30 mm hexagonal shaft and 6 x 40 mm section blades with plant protection plates which give a working width of 70 cm.
To get the most out of these cutters, the machine is equipped with an engine Garland OHV 4 stroke 208 cc with a power of 4200 W, ideal to maintain a long service life, even with intensive use.
| Working width | 70 cm |
| Number of cutters in standard equipment | 6 groups of cutters |
| Max. power | 4200 W |
| Tank capacity | 3,6 liters |
| Number of speeds | Single-gear |
| Oil tank capacity | 2 liters |
| Displacement | 208 cc |
| Diameter of the tiller | 370 mm |
| Tire protector disc | no |
| Height adjustable handlebars | Yes |
| Side adjustable handlebars | Yes |
| Weight | 50 kg |
| On wheel | Yes |
| Clutch type | Multidisc |
| Transmission | Primary: Belts / Secondary drive: Chain |
| IMPORTANT NOTICE |
| It is mandatory for the customer to check oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References
