Mini compact excavator DELEKS S100 1.0T
The DELEKS S100 1.0T Mini Compact Excavator is a compact machine capable of great performance in confined spaces such as buildings, parks and gardens.
The S100 comes standard with side control levers for better posture and even more precise control of boom and attachment movements and features dual speed to move quickly from one point to another in the work area.
It is extremely easy to use. Appreciated by rental companies and companies dealing with urban or green maintenance, but also by DIY enthusiasts.
The S100 is compact and can be easily transported by trailer or van, from one construction site to another and has a large amount of equipment that makes it very versatile. Standard 35 cm bucket.
It has a 3-cylinder Kubota D722 diesel engine , a 3-pump hydraulic system: double gear hydraulic pump + auxiliary pump, a 35 cm bucket, auxiliary hydraulic system on the arm for the use of the auger or hammer, it has a front blade, canopy and 3 free filters: air, oil, diesel and a tool box.
Technical specifications
| Engine |
| Model |
Kubota D722-EF11 |
| Type |
EU Stage V, water-cooled, 3 cylinders |
| Power |
10.2 kW/2500 rpm |
| Hydraulic system |
| Main pump |
Double gear pump |
| Maximum oil flow |
10.5 L/min + 10.5 L/min |
| Hydraulic pressure |
17.2 Mpa |
| Control pump |
Gear pump |
| Flow rate |
3.1 L/min |
| Hydraulic pressure |
3.9 Mpa |
| Hydraulic oil tank |
12.6 L |
| Ground pressure |
29 kpa |
| Performance |
| Adjustable undercarriage |
750 - 900 mm |
| Operating weight |
1050kg |
| Bucket width and capacity |
400mm / 400mm 0.03m3 |
| Swing speed |
8.3 rpm |
| Slow-speed |
2.0km/h, 4.0km/h |
| Inclination |
10° |
| Arm swing angle |
55° |
| Breakout force (bucket) |
10.4 kN |
| Breakout force (arm) |
5.4 kN |
| Ground clearance |
140 mm |
| Distance between running wheels |
1010 mm |
| Wheel width tracked |
180 mm |
| Fuel tank |
12 L |
Main dimensions
| IMPORTANT NOTICE |
|
| It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the moment of reception, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
|
| For the correct shipment of this product, the customer will need a forklift or similar for the unloading of this product as well as the address must be accessible for a 24t truck. |
