The chainsaw Oleo Mac GS411 It features a 2 Stroke Emak engine (EURO 5). This provides us with a power of 2.6HP / 1.9kW (8,500rpm) and a displacement of 39 cc. It also has a maximum fuel consumption of 820 g/h (8,000rpm).
This model of chainsaw Oleo Mac It features a capacitive electronic ignition system. This includes a Digital electronic coil with variable advance and a CHAMPION RCJ-7Y spark plug.
The chainsaw offers a system of power Supply and lubrication with WALBRO WT 780-G carburetor. It has a plastic filtering system with a wide filtering surface and is reusable. It has a tank capacity of 0.32 L of fuel.
The GS411 model comes with a system of Pinion transmission. This It has 6(3/8”) 7(.325”) sprocket teeth. It has a centrifugal clutch with a coupling at 3650 revolutions per minute.
This chainsaw features a front and rear plastic handle, with the rear handle being ergonomic. The handles are anti-vibration with 5 shock absorbers, 3 springs, and 2 rubber stops. The model has a weight (WITHOUT cutting tools) of 4.4Kg.
| Displacement | 39cc |
| Power | 2.6HP |
| Sword length | 41cm - 16" |
| Special chain pass | 3/8"x.050" |
| Chain pass (microlite) | .325"x.050" |
| Oil tank capacity | 0.22L |
| Fuel tank capacity | 0.32L |
| Sound pressure | 100.2 dB |
| Power level | 111.2 dB(A) |
| Dry weight without bar and chain | 4.4kg |
 |
The piston is composed of two elastic rings, a crankshaft, a forged and machined steel connecting rod, and a needle cage. The cylinder is coated in nickel, which offers optimal and continuous performance even for intensive use. It has a cutting speed of over 17 m/s. This allows us to make much faster and more precise cuts without damaging the plant. |
 |
Optimize combustion, achieve greater power, and reduce noise and pollutant emissions to a minimum. |
 |
The air filter cover with grapefruit allows us to quickly access the ICE DEVIC system and inspect or replace the spark plug or filter. |
 |
The PRIMER device pumps the mixture into the carburetor, thus helping with cold starting. |
 |
The large filtering surface provides an increase in the hours of autonomy between each filter cleaning. |
 |
The "EASY ON" system helps reduce startup kickbacks. |
 |
On/off switch and the semi-throttle control integrated into a single multifunction lever. |
 |
Double harpoon made of steel and removable plastic that features a secure attachment on the trunk, providing greater stability and control over the chainsaw when making cuts. |
 |
The side chain tensioner prevents any risk of contact with the chain. The nuts that secure the bar are part of the chain cover casing and prevent it from being lost or falling off. |
 |
The adjustable aluminum oil pump allows us to vary the oil flow depending on the use of the chainsaw as well as the length of the chain. With the engine idling, the pump does not send oil, which results in lower consumption and greater environmental care. |
 |
Fuel tank with external indicator. |
 |
Side handle coated with non-slip material that improves grip during chainsaw use. The chainsaw is equipped with an anti-vibration system which includes 3 spring dampers and 2 rubber dampers located between the handle and the engine mount to protect the operator from vibrations. |
| IMPORTANT NOTICE |
| Mandatory on the part of the client, review oil levels and lubrication before startup. If the goods cannot be checked at the time of receipt, it should be noted on the carrier's sheet that the customer is in agreement. except for pending exam. |
Data sheet
Specific References
