Side hammer crusher for tractor Deleks ALCE-140 50-90HP
- Tractor power: 50 - 90 HP
- Cutting height: 35 - 95 mm
- Cutting width: 1395 mm
- Number of hammers: 12
Deleks products take about 15 to 25 days. |
Side hammer shredder for tractor Deleks ALCE-140
The Arm brushcutter Deleks ALCE-140 is specially designed for tractors with low horsepower, and is 50-90HP. This brushcutter model is used for lawns, gardens and vineyards.
The model Deleks ALCE-140 is designed for cutting grass and brambles up to 4 cm in diameter. It is ideal for roadside verges. It can also be used for cutting bushes as it tilts about 90 degrees upwards and 60 degrees downwards
This Crusher Deleks also has a cAT 2 universal 3-point linkage. As for its features we can highlight its good transmission box GB Bologna made in Italy with freewheel.
The Brushcutter ALCE-140 comes with cE gimbal included, it also includes an electronically balanced rotor. The implement can be used on tractors with low power in gardens and orchards. It has a weight of 540 kg.
This model of Arm brushcutter Deleks guarantees the operator good comfort and ease of work. This is thanks to its outstanding features.
Among these features we can highlight the working width of 1395mm and the total width 1790 mm. We can also highlight the adjustable cutting height from 35 up to 95mm and the total height 115mm.
Features
Working width | 1395.0 mm |
Overall width | 1790.0 mm |
Cutting height min/max | 35.0 - 95.0 mm |
Weight | 540.0 kg |
Total height | 1150.0 mm |
Tractor power | 50 - 90 hp |
3-point hitch | Cat. 2 (ø 25.0-28.0 mm) |
Position of the gearbox | External |
Hood height | 470.0 mm |
Distance between the lower points | 840.0 - 970.0 mm |
Number of hammers | 12 |
Max. cutting diameter | 40.0-50.0 mm |
Total length | 1750.0 mm (closed) |
Ground to gearbox spacing | 650.0 mm |
Plate thickness | 5.0 mm + reinforcements |
Thickness of sheet metal on the sides | 8.0 mm |
Skid thickness | 8.0 mm |
Transmission type | V-belts |
Transmission: Gearbox | Lombarda Ingranaggi Srl (Warranty 3 years) |
Transmission: PTO | 540 r/min |
Transmission: direction of rotation | Schedule |
Transmission: freewheel | √ |
Transmission: rotor speed | 2134 rpm |
Transmission: gearbox oil | Yes / SAE 120 - ISO 72925 |
Transmission: diameter of upper pulley | 220.0 mm |
Transmission: lower pulley diameter | 165.0 mm |
Transmission: number of Koreas | 4 |
Transmission: dimensions of the Koreas | 17x1300 |
Rotor: diameter | 152.0 mm |
Rotor: bearing type and dimension | 40x90 |
Rotor: balancing | Electronic |
Rotor: blade thickness | 8.0 mm |
Hammers: weight | 1100.0 g |
Hammers: hole dia | 16.0 mm |
Hammers: base width | 140.0 mm |
Hammers: head width | 40.0 mm |
Hammers: diagonal | 97.0 mm |
Roll: diameter | 152.0 mm |
Roll: sheet thickness | 6.0 mm |
Roll: bearing type and dimension | 90x40 mm - GB276-6308 |
Displacement and dimensions | View photos |
ø Hydraulic Cylinder A | 80.0-35.0 mm |
ø Hydraulic Cylinder B | 60.0-30.0 mm |
Oil pressure min/max | 120 - 150 bar |
Optiomal oil flow | 18 - 22 l/min |
Hydraulic hoses | WP 400 Bar, 1/2" Agri Standard |
Cardan | CE 5x1800 mm |
Hood length | 770.0 mm |
Packaging dimensions | 1800.0*1000.0*1000.0 mm |
IMPORTANT NOTICE |
Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
- Shredder type
- Shredder with side arm
- Type of cut
- Hammers
- Working width PTO
- 140 cm
- Tractor power
- 50 - 90 HP
- Cardan shaft
- Including
- Type of coupling
- Pantograph displacement
- Displacement
- Hydraulic
- Robustness
- Medium-Heavy
- Number of hammers
- 12
- Working width (cm)
- 140 - 149 cm
- Country of manufacture
- Italy
- Weight
- 540 kg
Specific References
- EAN-13
- 8053470231063
Agricultural Machinery After-Sales Service
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Warranty and Factory Repair
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
Online Mechanics - Fast and Efficient
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips.
Workshop repair
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
☎️ Always by your side
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.
✔️ Advantages of buying in the Spanish territory
- National warranty: By purchasing from authorized distributors throughout Spain, you are assured of receiving a 100% Spanish warranty for your products.
- Local after-sales service: In case of any inconvenience or need for after-sales service, you will have a more efficient and accessible support when purchasing within Spain.
❌ Disadvantages of buying outside Spanish territory
- Complicated warranty management: Buying products outside Spain can make warranty management difficult, as there may be problems with the Spanish serial number or delays in the process.
- Limited after-sales service: The availability of after-sales service may be limited or less accessible when purchasing products abroad.
- Tax declaration: When purchasing products outside Spain, customers may be required to make an additional tax declaration, such as an intra-community purchase, which may involve additional tax formalities.
Review
5 other products
Multifunctional arm crusher for Garto LGA tractor
- Weight : 250 kg - 280 kg - 315 kg
- Working width : 1200 mm - 1400 mm - 1600 mm
CARDAN SHAFT INCLUDED
€3,218.63 VAT incl.
Manually adjustable shredder for Garto PLF tractor
- Motor diameter : 76 mm
- Cutting width : 110 - 130 cm
CARDAN SHAFT INCLUDED
€1,756.48 VAT incl.
Hydraulic Offset PTO Shredder GEO ITALY GKK
- Weight : 490 - 615 kg
- Power Supply pTO tractor
- Working width PTO : 160 - 240 cm
- Cardan shaft : Yes
- Robustness : Medium
- Min. tractor power : 50 - 80 HP
- Number of hammers : 28 - 40
- Country of manufacture : Italy
CARDAN SHAFT INCLUDED
€3,277.88 VAT incl.
Reinforced movable hammer crusher EuroCentauro Jaén
- Working width: 1690-2190 mm
- Remaining pruning up to 7 cm
- Top quality hammers
- Adjustable rear opening
CARDAN SHAFT INCLUDED
€3,578.34 VAT incl.
Hammer crusher for tractor Deleks TORO-220 70-120HP
- Tractor power: 70 - 120 HP
- Cutting height: 10 - 75 mm
- Cutting width: 2200mm
- Number of hammers: 20 (or 60 blades)
€4,339.09 VAT incl.
Product Reviews / Q&A
-
Reviews (0)
-
Questions & Answers (0)
-
Latest
-
Latest