Side arm brushcutter for tractor Deleks AIRONE-100
The side arm brushcutter Deleks AIRONE-100 is specially designed for tractors with 25-60HP power. This brushcutter model is used for mowing grass on roadsides with poor accessibility or inside parks.
The model Deleks AIRONE-100 is designed for pruning trees and hedges with a maximum diameter of 2 to 3 cm. It can also be used to cut bushes as this model has 40 blades . The blades have a hole dimension of 13 mm.
This brushcutter from Deleks also features a hydrocontrol hydraulic distributor made in Italy. In addition, it has a Casappa double hydraulic pump. This is made in Italy and allows to move the arm and at the same time to be able to cut.
The AIRONE-100 brushcutter comes with a CE cardan shaft and a Casappa hydraulic motor. The tool can be used on tractors with low power in gardens and orchards.
The AIRONE-100 brushcutter model Deleks offers a large oil tank. It has a capacity of 55 L given already at Shell Tellus 46 S2 MX 46 level. It has a light weight of 298 kg which allows the use of the model in orchards.
This model of Brushcutter Deleks guarantees the operator a good comfort and ease of work. This is thanks to its outstanding features.
Among these features we can highlight the working width of 1000mm and the total width of 1200mm. We can also highlight the adjustable cutting diameter from 20 to 80mm and the total height of 2010mm.
Features
| Working width |
1000 mm |
| Total width |
1200 mm (closed) |
| Cutting height min/max |
20 - 80 mm |
| Weight |
298 kg |
| Total height |
2010 mm |
| Tractor power |
25-60 hp |
| 3-point hitch |
Cat. 1 (ø 19.0-22.0mm) |
| Hood height |
330 mm |
| Distance between lower points |
470 - 570 mm |
| Max. cutting diameter |
15 mm |
| Total length |
1070 mm |
| Space between ground and transmission box |
400 mm |
| Plate thickness |
4 mm |
| Transmission type |
Hydraulic |
| Transmission: PTO |
540 r/min |
| Transmission: rotation direction |
Schedule |
| Transmission: freewheel |
√ |
| Transmission: rotor speed |
1500 r/min |
| Transmission: gearbox oil |
Yes / SAE 120 - ISO 72925 |
| Rotor: diameter |
78 mm |
| Rotor: bearing type and dimension |
GB276-6007 |
| Rotor: balancing |
Electronic |
| Rotor: blade thickness |
14 mm |
| Roll: diameter |
102 mm |
| Roll: sheet thickness |
4 mm |
| Roll: bearing type and dimension |
φ25 |
| Hydraulic tubes |
WP 400 Bar |
| Cardan shaft |
CE 4x700 mm |
| Hood length |
650 mm |
| No. of blades |
40 |
| Slats: Weight |
130 g |
| Blades: Hole dia |
13 mm |
| Displacement |
2910 mm |
| Transmission: gearbox oil |
55 lt |
| Chocks: base width |
50 mm |
| Channels: diagonal |
85 mm |
| Packing dimensions |
1280*800*2150mm |
