CARDAN SHAFT INCLUDED
| Deleks products take about 15 to 30 days. |
Rear shredder for tractor LINCE 100 DELEKS 100 cm is designed for micro-tractors, tractors equipped with power ratings from 16 to 40 HP, for gardens and agricultural fields. Forged steel hammers, for cutting grass and brambles. The cutting height can be adjusted thanks to its rear roller and adjustable skids.
Your structure is made entirely of Swedish SSAB steel, the rotor is made of electronically balanced ARVEDI tube, made of S355 steel, 8 mm thick, with hammers mounted on 6 rows instead of 4 hammers at HARDOX, sKF brand rotor bearings.
It has a Lombarda Ingranaggi gearbox with freewheel and 3-year warranty, the frame is equipped with an inner curb that deflects the air flow towards the rotor for a mulching effect. The internal positioning of the roller gives more efficiency and reduces run time: the cut grass passes over the roller without being crushed, and is removed faster.
Cuena with some 330g forged steel hammers to cut up to 2.5 cm in diameter, it has 3 heavy duty straps with an external tension adjustment, its rear roller and adjustable side skids. (GIMBAL INCLUDED)
| Working width | 1000.0 mm |
| Overall width | 1115.0 mm |
| Cutting height min/max | 10.0 - 45.0 mm |
| Weight | 140.0 kg |
| Total height | 750.0 mm |
| Tractor power | 16 - 40 hp |
| 3-point hitch | Cat. 1 (ø 19.0-22.0mm |
| Position of the gearbox | 555.0 mm from left side / 561.0 mm from right side. |
| Hood height | 370.0 mm |
| Distance between the lower points | 470.0 - 710.0 mm |
| Number of hammers | 16 |
| Max. cutting diameter | 20.0 - 30.0 mm |
| Total length | 730.0 mm |
| Ground to gearbox spacing | 472.0 mm |
| Plate thickness | 3.0 mm |
| Thickness of sheet metal on the sides | 5.0 mm |
| Skid thickness | 6.0 mm |
| Transmission type | V-belts |
| Transmission: Gearbox | Lombarda Ingranaggi Srl (Italy) (Warranty 3 years) |
| Transmission: PTO | 540 r/min |
| Transmission: direction of rotation | Schedule |
| Transmission: freewheel | √ |
| Transmission: rotor speed | 3150.0 rpm |
| Transmission: gearbox oil | Yes / SAE 120 - ISO 72925 |
| Transmission: diameter of upper pulley | 206.0 mm |
| Transmission: lower pulley diameter | 106.0 mm |
| Transmission: number of Koreas | 3 |
| Transmission: dimensions of the Koreas | AX39 |
| Rotor: diameter | 102.0 mm |
| Rotor: bearing type and dimension | SKF UCF-207 |
| Rotor: balancing | Electronic |
| Rotor: blade thickness | 8.0 mm |
| Hammers: weight | 330.0 g |
| Hammers: hole dia | 12.0 mm |
| Hammers: base width | 80.0 mm |
| Hammers: head width | 14.0 mm |
| Hammers: diagonal | 75.0 mm |
| Roll: diameter | 102.0 mm |
| Roll: sheet thickness | 5.0 mm |
| Roll: bearing type and dimension | FL205 |
| Cardan | CE 4x800 mm |
| Hood length | 665.0 mm |
| Horizontal displacement | - |
| Packing dimensions | 1150.0*850.0*700.0 mm |
| IMPORTANT NOTICE |
| Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
Specific References
