PTO Hammer Crusher DELEKS GEPARD 50 - 120 HP
Rating:
(0)
- Working width 1500 - 2060 mm
- 540 RPM
- Power 50 - 120 HP
- Hammers 16 - 24
CARDAN SHAFT INCLUDED
| Deleks products take about 15 to 30 days. |
close
PTO Hammer Crusher DELEKS GEPARD 50 - 120 HP
€3,445.96
DELEKS GEPARD 50 - 120 HP PTO Hammermill Crusher
DELEKS GEPARD 50 - 120 HP PTO Hammermill CrusherDesigned for professional use, this brushcutter model is suitable for cutting grass and also for pruning olive trees and vine shoots.
It has a robust chassis and a 160 mm diameter rotor, is compatible with all tractors with 3-point hitch of category 1-2, its structure is completely manufactured with swedish steel SSAB, which has a thickness of 4 + 4 mm and sides of 8 mm.
It has a 25 cm height of the front mouth which prevents crushing the grass when it is high, it has a Lombarda Ingranaggi transmission box with free wheel and a 3-year warranty, it also has a 400 mm side shift.
Its hammers are made of forged steel, with a 110 mm base, a weight of 1.5 kg and a 20 mm diameter liner, these are designed to spray vegetation up to 5-6 cm in diameter.
Its rotor is made of ARVEDI tube with a diameter of 160 mm, which is electronically balanced, is equipped with SKF rotor bearings, its rear roller is 160 mm in diameter with internal bearings and are protected against dust and debris.
Your rotor supports reinforced and fixed to the chassis with 8 bolts, this makes it a much more comfortable machine, it has a mulching effect that makes the plant material stay longer in the chamber and is pulverized.
Features
| Model | GEPARD 150 | GEPARD 170 | GEPARD 190 | GEPARD 210 |
| Working width | 1500 mm | 1650 mm | 1860 mm | 2060 mm |
| Overall width | 1740.0 mm | 1950.0 mm | 2150.0 mm | 2350.0 mm |
| Tractor power | 50 - 120 HP | 60 - 120 HP | 70 - 100 HP | 70 - 120 HP |
| Weight | 560.0 kg | 600.0 kg | 655.0 kg | 680.0 kg |
| Number of hammers | 16 | 18 | 20 | 24 |
| Transmission type | V-belts | V-belts | V-belts | V-belts |
| Cutting height min/max | 15 - 75 mm | |||
| Total height | 930.0 mm | |||
| 3-point hitch | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0mm | |||
| Hood height | 500.0 mm | |||
| Distance between the lower points | 660.0 - 800.0 mm | |||
| Max. cutting diameter | 50.0-70.0 mm | |||
| Total length | 1260.0 mm | |||
| Ground to gearbox spacing | 515.0 mm | |||
| Plate thickness | 4.0 mm + 4.0 mm | |||
| Thickness of sheet metal on the sides | 8.0 mm | |||
| Skid thickness | 10.0 mm | |||
| Transmission: Gearbox | Lombarda Ingranaggi Srl (Warranty 3 years) | |||
| Transmission: PTO | 540 r/min | |||
| Transmission: direction of rotation | Schedule | |||
| Transmission: freewheel | √ | |||
| Transmission: rotor speed | 2000.0 rpm | |||
| Transmission: gearbox oil | Yes / SAE 120 - ISO 72925 | |||
| Transmission: number of Koreas | 3 | 5 | 5 | 5 |
| Transmission: diameter of upper pulley | 230.0 mm | |||
| Transmission: lower pulley diameter | 190.0 mm | |||
| Transmission: dimensions of the Koreas | Transmission: number of Koreas | |||
| Rotor: diameter | 160.00 mm | |||
| Rotor: bearing type and dimension | SKF® 2212 | |||
| Rotor: balancing | Electronic | |||
| Rotor: blade thickness | 10.0 mm - S355 | |||
| Hammers: weight | 1486.0 g | |||
| Hammers: hole dia | 20.5 mm | |||
| Hammers: base width | 110.0 mm | |||
| Hammers: head width | 74.0 mm | |||
| Hammers: diagonal | 97.0 mm | |||
| Roll: diameter | 160.0 mm | |||
| Roll: sheet thickness | 8.0 mm | |||
| Roll: bearing type and dimension | 6210 | |||
| Cardan | CE 6x1000 mm | |||
| Hood length | 870.0 mm | |||
| Horizontal displacement | 400.0 mm | |||
| Packing dimensions | 180 x 130 x 100 cm | 200 x 130 x 100 cm | 220 x 130 x 100 cm | 240 x 130 x 100 cm |
| IMPORTANT NOTICE |
| Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
260381
Data sheet
- Shredder type
- Rear shredder
- Type of cut
- Hammers
- Working width PTO
- 150 - 206 cm
- Tractor power
- 50 - 120 HP
- Cardan shaft
- Included
- Type of coupling
- Lateral displacement
- Displacement
- Manual
- Robustness
- Medium-Heavy
- Number of hammers
- 16 - 24
- ✔️
- Rear rakes
- Working width (cm)
- 150 - 159 cm
160 - 169 cm
180 - 189 cm
200 - 209 cm - Country of manufacture
- Italy
- Weight
- 560 - 680 kg
Specific References
- ean13
- 8053470238413
- mpn
- GEPARD150PTO
New
✔️ Advantages of making purchases in the Spanish territory
- National warranty: By purchasing from authorized distributors throughout Spain, you are assured of receiving a 100% Spanish warranty for your products.
- Local after-sales service: In case of any inconvenience or need for after-sales service, you will have a more efficient and accessible support when purchasing within Spain.
❌ Disadvantages of buying outside Spanish territory
- Complicated warranty management: Buying products outside Spain can make warranty management difficult, as there may be problems with the Spanish serial number or delays in the process.
- Limited after-sales service: The availability of after-sales service may be limited or less accessible when purchasing products abroad.
- Tax declaration: When purchasing products outside Spain, customers may be required to make an additional tax declaration, such as an intra-community purchase, which may involve additional tax formalities.
Related Product
Promotions
Review
5 other products
- -4%
-4%
PTO Shredder with Collector GEO ITALY FL 90 - 160 cm
- Weight : 293 - 367 kg
- Power Supply pTO tractor
- Working width PTO : 90 - 160 cm
- Cardan shaft : Yes
- Robustness : Medium
- Min. tractor power : 25 - 60 HP
- Number of hammers : 16 - 24
- Country of manufacture : Italy
CARDAN SHAFT INCLUDED
€2,069.91
Regular price
€2,156.16
Price
excl. VAT
€2,504.60 VAT incl.
€2,504.60 VAT incl.
- -7%
-7%
Hydraulic side arm brush cutter Zeppelin Grand Loire 100-140 HP
- Working width: 1300 mm
- Tractor power: 100 - 140 HP
CARDAN SHAFT INCLUDED
€9,365.24
Regular price
€10,070.15
Price
excl. VAT
€11,331.94 VAT incl.
€11,331.94 VAT incl.
- -4%
-4%
Hammer crusher for tractor Deleks LEOPARD-180-SP 40-70HP
- Tractor power: 40 - 70 HP
- Cutting height: 10 - 45 mm
- Total width: 1991.5 mm
- Number of hammers: 28
€2,270.14
Regular price
€2,364.73
Price
excl. VAT
€2,746.87 VAT incl.
€2,746.87 VAT incl.
- -7%
-7%
Hammer crusher for tractor Zeppelin Sahara movable
- Working width: 1220 / 1720 mm
- Power requirement: 18-25 / 40-50 hp
- Weight: 312 / 397 kg
CARDAN SHAFT INCLUDED
€2,081.20
Regular price
€2,237.85
Price
excl. VAT
€2,518.25 VAT incl.
€2,518.25 VAT incl.
- -4%
-4%
Arm crusher for tractor Giemme BCN 140 - 180 cm
- Type of shredder : Rear shredder
- Cutting type : Hammer
- PTO working width : 140 - 180 cm
- Tractor power : 50 - 70 HP
€3,256.94
Regular price
€3,392.65
Price
excl. VAT
€3,940.90 VAT incl.
€3,940.90 VAT incl.
Product Reviews / Q&A
-
Reviews (0)
-
Questions & Answers (0)
-
Latest
-
Latest