4T 10W40 Oil 1 Liter
- For 4-stroke gasoline engines
- Suitable for all types of fuel.
- 1 Liter
€14.97 VAT incl.
The Gas oline Motor Pump Genergy Volga 105000 L/H 25 m has a maximum flow rate of 105,000 L/H, a thread size of 100 mm, its maximum lift height is 25 meters, and a suction time of ≤200 seconds at 5 meters .
It has dimensions without wheels of 627x508x540 mm and with wheels of 627x611x643 mm, a maximum suction height of 6 meters, with a fuel tank capacity of 3.1 L. It has a 4-stroke OHV air-cooled gasoline engine with a displacement of 272 cc
The Volga Gasoline Motorpump Genergy 105000 L/H 25 m is prepared for clean and dirty water without solids, has a weight of 43 kg, and a service from 5º to 40º of temperature. Its starting type is manual, and its capacity and oil grade is 1L - SAE10W40.
Application | Clean or dirty water without solids >5o |
Thread size-Suction diameter | BSP 4" - 100mm |
Maximum flow rate | 105.000L/H |
Maximum suction head | 6MTS |
Maximum total head | 25MTS |
Suction time at 5mts | ≤200S |
Motor model | SGB270PRO |
Displacement | 272cc |
Engine type | Gasoline, 4-stroke OHV air-cooled |
Average sound pressure level 7mts LpA (Idle-nominal) | 69dB - 79dB (A) |
Guaranteed sound power level LwA | ≤108dB |
Measurement uncertainty | ≤1.5dB |
Start-up type | Manual |
Fuel tank capacity | 3.1L |
Consumption at 25-50-75% throttle | 1.4L/H - 1.8L/H - 2.3L/H |
Autonomy 25-50-75% throttle | 2.2H - 1.7H - 1.3H |
Oil capacity and grade | 1L - SAE10W40 |
Standard | EN809 |
Service temperature | 5º-40º C |
Transport kit | Carrying handle |
Dimensions without - with wheels | 627x508x540 - 627x611x643mm |
Weight | 43 kg |
Reference | 30025 |
IMPORTANT NOTICE |
It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement , unless an examination is pending. |
Data sheet
Specific References
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips.
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.