The gasoline motor pump Genergy Turia II 35000 L/H 28 m gives us a service temperature of 5º to 40º, a capacity and oil grade of 0.5L - SAE10W40, and a displacement of 149 cc with a thread size of 50mm.
This motor pump gives us a suction time at 5 meters of ≤130 seconds, a fuel tank capacity of 1.1 L, and a weight of 18 kg. It has a maximum flow rate of 35,000 L/H,its dimensions are 425x378x446 mm, and its starting type is manual.
The gasoline motor pump Genergy Turia II 35000 L/H 28 m has a 4-stroke OHV air-cooled gasoline engine, a maximum suction head of 7 meters, and a maximum total lift height of 28 meters. Itcan be used in both clean and dirty water without solids.
| Application | Clean or dirty water with no solids >5o |
| Thread size - Suction diameter | BSP 2" - 50mm |
| Maximum flow rate | 35.000L/H |
| Maximum suction head | 7MTS |
| Maximum total head | 28MTS |
| Suction time at 5mts | ≤130S |
| Motor model | SGB149PRO |
| Displacement | 149cc |
| Engine type | Gasoline, 4-stroke OHV air-cooled |
| Average sound pressure level 7mts LpA (Idle-nominal) | 66dB - 74dB (A) |
| Guaranteed sound power level LwA | ≤102dB |
| Measurement uncertainty | ≤1.5dB |
| Start-up type | Manual |
| Fuel tank capacity | 1.1L |
| Consumption at 25-50-75% throttle | 0.53L/H - 0.57L/H - 0.76L/H |
| Autonomy 25-50-75% throttle | 2.2H - 2.1H - 1.5H |
| Oil capacity and grade | 0.5L - SAE10W40 |
| Standard | EN809 |
| Service temperature | 5º-40º |
| Transport kit | Carrying handle |
| Dimensions | 425x378x446 mm |
| Weight | 18 kg |
| Reference | 30015 |
| IMPORTANT NOTICE |
| It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement , unless an examination is pending. |
Data sheet
Specific References
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips.
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.
