Hydraulic cutting bar Deleks HR-130 1300mm
- Cutting width: 1300 mm
- Number of blades: 17
- Cutting diameter: 25 mm
- Weight: 58 kg
€1,231.48 VAT incl.
Deleks products take about 15 to 25 days. |
The AIRONE-180-TR hydraulic hedge trimmer arm It is specially designed for tractors with a power of 20-60HP. This arm model is used for cutting grass on roadsides with limited accessibility or within parks.
The model Deleks AIRONE-180-TR It is designed for pruning trees and hedges with a maximum diameter of 2 to 3 cm. It can also be used for cutting shrubs as this model features 24 blades.
This Hedge trimmer arm of/from Deleks It also features a Hydrocontrol hydraulic distributor manufactured in Italy. Additionally, it is equipped with a double Casappa hydraulic pump. This pump has been manufactured in Italy and allows for moving the arm while simultaneously cutting.
The AIRONE-180-TR Hedge Trimmer Arm comes with CE gimbal included, it also includes a Casappa hydraulic motor. The implement can be used on low-power tractors in gardens and orchards.
This model of Hedge trimmer arm Deleks It guarantees the operator good comfort and ease of use. This is thanks to its notable features. It has a lightweight of 290 kg, which allows the model to be used in orchards.
Among these features, we can highlight the working width of 1300mm and the total width of 1200mm. We can also highlight the cutting diameter of 25 mm and the total height of 2010mm.
Working width | 1800 mm |
Total width | 1200 mm (closed) |
Weight | 290 kg |
Total height | 2010 mm |
Tractor power | 20-60 hp |
Three-point hitch | Cat. 1-2 (ø 19-22mm / 25-28mm) |
Distance between the lower points | 470 - 570 mm |
Maximum cutting diameter | 25 mm |
Total length | 1070 mm |
Space between the ground and the transmission box | 400 mm |
Type of transmission | Hydraulics |
Transmission: PTO | 540 rpm (revolutions per minute) |
Transmission: direction of rotation | Schedule |
Transmission: freewheel | √ |
Transmission: gearbox oil | Yes / SAE 120 - ISO 72925 |
Number of slats | 24 |
Hydraulic tubes | WP 400 Bar |
Cardan | CE 4x700 mm |
Displacement | 3460 mm |
Transmission: gearbox oil | 55 liters |
Packaging dimension | 1280*800*2150 mm |
ADVANTAGES
Equipment
IMPORTANT NOTICE |
Mandatory on the part of the client, review oil levels and lubrication before startup. If the goods cannot be checked at the time of receipt, it should be noted on the carrier's sheet that the customer is in agreement. except for pending exam. |
Data sheet
Specific References
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips.
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.