Hydraulic hedge trimmer arm for tractor Deleks AIRONE-160-TR
The AIRONE-160-TR hydraulic hedge trimmer arm It is specially designed for tractors with a power of 20-60HP. This arm model is used for cutting grass on roadsides with limited accessibility or within parks.
The model Deleks AIRONE-160-TR It is designed for pruning trees and hedges with a maximum diameter of 2 to 3 cm. It can also be used for cutting shrubs as this model features 21 blades. These have a hole dimension of 13 mm.
This Hedge trimmer arm of/from Deleks It also features a Hydrocontrol hydraulic distributor manufactured in Italy. Additionally, it is equipped with a double Casappa hydraulic pump. This pump has been manufactured in Italy and allows for moving the arm while simultaneously cutting.
The AIRONE-160-TR Hedge Trimmer Arm comes with CE gimbal included, it also includes a Casappa hydraulic motor. The implement can be used on low-power tractors in gardens and orchards.
The model of AIRONE-160-TR Arm Deleks It offers us a large oil tank. It has a capacity of 55 L, already at the Shell Tellus 46 S2 MX 46 level. It has a lightweight of 282 kg, which allows the model to be used in orchards.
This model of Hedge trimmer arm Deleks It guarantees the operator good comfort and ease of work. This is thanks to its notable features.
Among these features, we can highlight the working width of 1600mm and the total width of 1200mm. We can also highlight the cutting diameter of 25 mm and the total height of 2010mm.
Characteristics
| Working width |
1600 mm |
| Total width |
1200 mm (closed) |
| Weight |
282 kg |
| Total height |
2010 mm |
| Tractor power |
20-60 HP |
| Three-point hitch |
Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0mm) |
| Distance between the lower points |
470 - 570 mm |
| Maximum cutting diameter |
25 mm |
| Total length |
1070 mm |
| Space between the ground and the transmission box |
400 mm |
| Type of transmission |
Hydraulics |
| Transmission: PTO |
540 rpm (revolutions per minute) |
| Transmission: direction of rotation |
Schedule |
| Transmission: freewheel |
√ |
| Transmission: gearbox oil |
Yes / SAE 120 - ISO 72925 |
| Number of slats |
21 |
| Hydraulic tubes |
WP 400 Bar |
| Cardan |
CE 4x700 mm |
| Displacement |
3460 mm |
| Transmission: gearbox oil |
55 liters |
| Packaging dimension |
1280*800*2150 mm |
ADVANTAGES
- Hydraulic distributor: Hydrocontrol.
- Double hydraulic pump: Casappa. It allows you to move the arm and cut at the same time.
- Robust yet lightweight chassis for optimal maneuverability, even with medium-low power tractors.
- The hydraulic controls are included with the machine.
- Hydraulically adjustable arm, 100% adaptable to the inclination of any terrain and capable of overcoming obstacles.
- Lightweight design allows for use in gardens. Adjustable rear roller.
- Standard cutting teeth, which can be easily purchased on the market or from us.
Equipment
- Chassis with 3 hydraulic movements.
- Remote control with 4 levers and flexible tubes.
- Independent hydraulic system
- 55 L oil tank
- Cutting bar with 17 teeth and an effective working length of 130cm.
- 3-point hitch Cat. 1-2 standards.
- CE cardan included
| IMPORTANT NOTICE |
|
| Mandatory on the part of the client, review oil levels and lubrication before startup. If the goods cannot be checked at the time of receipt, it should be noted on the carrier's sheet that the customer is in agreement. except for pending exam. |
