The Oleo Mac DEB 518 wheel brushcutter is powered by a Yamaha MA 190 engine. The engine provides 5.4HP of power and a total displacement of 190cc. This engine is powerful and reliable to ensure consistent and maximum performance with manual ignition system.
This model includes a belt and chain drive, with a single gear of 2.8km/h. This traction makes when there is a snag securing the engine and transmission, ensuring long life.
The front wheels of this model are also made of plastic and rubber on pivoting bearings. It also includes a crankshaft with protection and supplementary steel support to offer maximum resistance in case of crashes.
The diameter of the rear wheels is 420 mm and that of the front wheels is 200 mm. It includes a differential on the pivoting wheels to reduce the steering angle and facilitate handling on any terrain.
The cutting plate used is made of steel with lateral deflector with a cutting width of 510 mm. It also provides four cutting heights 110-90-70-55mm with centralized regulation and controllable from the handle.
The type of blade used on the wheel brushcutter Oleo Mac DEB 518 is Mulching . Mulching promotes the life of the soil by providing a protective layer that reduces discrepancies.
It is a tough and reliable machine for the demanding user as it can cut the tallest grass quickly. It is also a machine that stands the test of time, thanks to its chassis and engine.
In addition to the wheels, it has a vertically adjustable handlebar in two positions. The handlebar has a steel tube frame and handle, guaranteeing maximum resistance over time. The traction of this wheel brushcutter is provided by the rear plastic and rubber wheels on bearings.
| Engine | Yamaha MA 190 |
| Power | 5.4HP |
| Displacement | 190cc |
| Starter | Manual wind-up |
| Transmission | Belt and chain |
| Gears | Single-gear |
| Forward speed | 2.8km/h |
| Cutting plate | Steel with side deflector (fixed) |
| Cutting width | 510mm |
| Cutting height adjustment | Centralized, adjustable by means of handle |
| Cutting height | 110-90-70-55mm |
| Blade type | Mulching |
| Motor brake | Yes |
| Blade brake | No |
| Traction | Rear wheels |
| Front wheel | Plastic and rubber on bearings |
| Type | Pivoting |
| Rear wheels | Plastic and rubber on bearings |
| Type | Pivoting |
| Rear wheel diameter | 420mm |
| Diameter front wheels | 200mm |
| Handlebar adjustment | Vertical in 2 positions |
| Weight | 52kg |
| IMPORTANT It is mandatory for the customer to check oil and grease levels before start-up ! |
| If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement, unless an inspection is pending. |
Data sheet
Specific References
