Gasoline wheel brushcutter Centauro TP55
- 4-stroke engine
- Displacement 170 cc
- Self-propelled
- Weight 53 kg
€546.97 VAT incl.
The wheel brushcutter Oleo Mac DEB 517 is powered by a Rato RV 170 engine. The engine provides 4.3 HP of power and a total displacement of 173 cc. This engine is powerful and reliable to ensure constant and maximum performance with manual ignition system.
This model includes a belt and chain transmission, with a single 2.8 km/h gear. The traction of this wheel brushcutter is on plastic and rubber rear wheels on bearings.
The front wheels of this model are also plastic and rubber on pivoting bearings. It also includes a crankshaft with protection and supplementary steel support to offer maximum resistance in case of shocks.
The diameter of the rear wheels is 420 mm and that of the front wheels is 200 mm. It includes a differential on the pivoting wheels to reduce the steering angle and facilitate handling on any terrain.
In addition to the wheels, it has a fixed handlebar. The handlebar has a steel tube frame and handle, guaranteeing maximum resistance over time. This system ensures that when there is an inconvenience securing the engine and transmission, ensuring a long life.
The cutting plate used is made of steel with lateral deflector with a cutting width of 510 mm. It also provides us with four cutting heights 110-90-70-55 mm with centralized regulation and controllable from the handle.
The type of blade used on the brushcutter Oleo Mac DEB 517 is Mulching . Mulching promotes the life of the soil by providing a protective layer that reduces discrepancies.
It is a tough and reliable machine for the demanding user as it can cut the tallest grass quickly. It is also a machine that stands the test of time, thanks to its chassis and engine.
Engine | Rato RV 170 |
Power | 4.3 HP |
Displacement | 173 cc |
Starter | Manual wind-up |
Transmission | Belt and chain |
Gears | Single gear |
Forward speed | 2.8 km/h |
Cutting plate | Steel with side deflector (fixed) |
Cutting width | 510 mm |
Cutting height adjustment | Centralized, adjustable by means of the handle |
Cutting height | 110 - 90 - 70 - 55 mm |
Blade type | Mulching |
Motor brake | Yes |
Blade brake | No |
Traction | Rear wheels |
Front wheel | Plastic and rubber on bearings |
Type | Pivoting |
Rear wheels | Plastic and rubber on bearings |
Rear wheels diameter | 420 mm |
Diameter front wheels | 200 mm |
Handlebar adjustment | Fixed |
Weight | 52 kg |
IMPORTANT It is mandatory for the customer to check oil and grease levels before start-up ! |
If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References