Wheel brushcutter Oleo Mac DEB 5158
The wheel brushcutter Oleo Mac DEB 5158 has a YAMAHA engine model MA 190 which provides a power of 5.4 HP and a displacement of 190 cc. This engine has a manual wind-up starter.
This brushcutter model Oleo Mac also has a belt and chain transmission system. The system has a variable speed drive. It offers a traction advance with a forward speed of 2.0 km/h to 4.2 km/h in 7 steps.
The DEB 5158 offers a cutting system. It has a steel cutting plate with side deflector which is fixed. It has a cutting width of 510 mm and a cutting height that varies between 110-90-70-55 mm.
The DEB 5158 model has a centralized cutting height adjustment. The height adjustment is adjustable in 4 positions by means of the handle. It has a mulching type blade and engine brakes.
This machine offers a transmission system with rear wheel drive. It has metal and rubber front wheels on pivoting bearings. The rear wheels are made of plastic and rubber on high type bearings.
This brushcutter from Oleo Mac has a wheel diameter of this model is 370 mm on rear wheels and 200 mm on front wheels.
This DEB 5158 brushcutter includes a handlebar with an adjustment both vertically and horizontally. It has a machine weight of only 62 kg.
The brushcutter model Oleo Mac is designed for both professional and private users. The machine is intended for the maintenance of dense vegetation with debris.
Thanks to its heavy-duty mulching blade, which is reinforced for cutting even vegetation, weeds and brambles. Both the tubular steel frame and the reinforced steel platform guarantee durability.
It has a large area discharge in order to release the cut materials. It has a simple centralized height adjustment control with a lever on the handlebar. This ensures maximum operator comfort.
The model has a smooth operation which is reinforced by the wheels and differential on the rear wheels. It offers reduced turning and maximum agility thanks to its 360° pivoting dolly.
Features
| Engine |
Yamaha MA 190 |
| Fuel |
Gasoline |
| Platform |
Steel |
| Power |
5,4 Hp |
| Displacement |
190 cc |
| Cutting width |
51 cm |
| Cutting system |
Rotating blades |
| Drive system |
Variable self-propelled |
| Transmission |
Belt and chain with variable speed drive |
| Blade type |
Mulching |
| Wheels |
diameter 200-370 mm |
| Speed (Km / h) |
2,0-4,2 Km/h |
| Weight |
62 Kg |
IMPORTANT
It is mandatory for the customer to check oil and grease levels before start-up ! |
| If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
