CARDAN SHAFT INCLUDED
| Deleks products take about 15 to 20 days. |
The LINCE 140 X DELEKS Tractor Hammermill Side Shredder LINCE 140 X DELEKS has a design for tractors equipped with power ratings from 20 to 40 HPIt is designed for use in gardens and agricultural fields. It has a forged steel hammers for mowing grass and brambles.
The cutting height of this side hammer shredder can be adjusted thanks to the rear roller and adjustable skids. CAT 1 universal 3-point hitch.
The structure is made entirely of Swedish SSAB steel, rotor made of tube ARVEDIWhich is electronically balanced, is made of S355 steel, thickness 8 mm with hammers mounted on 6 instead of 4 blades. Hammer supports in HARDOX, sKF brand rotor bearings, lombarda Ingranaggi transmission box with freewheel and 3-year warranty.
This shredder is manually operated, its frame is equipped with an internal curb that diverts the air flow towards the rotor for a mulching effect, the inside positioning of the roller gives more efficiency and reduces the running time: the cut grass passes over the roller without being crushed, and it is eliminated more quickly
Features 330g forged steel hammers for cutting up to 2.5 cm in diameter, 3 heavy-duty straps with external tension adjustment, rear roller and adjustable side skids.
| Working width | 1400.0 mm |
| Overall width | 1520.0 mm |
| Cutting height min/max | 10.0 - 45.0 mm |
| Weight | 205.0 kg |
| Total height | 750.0 mm |
| Tractor power | 20 - 40 hp |
| 3-point hitch | Cat. 1 (ø 19.0-22.0mm |
| Hood height | 370.0 mm |
| Distance between the lower points | 520.0 - 620.0 mm |
| Number of hammers | 24 |
| Max. cutting diameter | 20.0 - 30.0 mm |
| Ground to gearbox spacing | 472.0 mm |
| Plate thickness | 3.0 mm |
| Thickness of sheet metal on the sides | 5.0 mm |
| Skid thickness | 6.0 mm |
| Transmission type | V-belts |
| Transmission: Gearbox | Lombarda Ingranaggi Srl (Italy) (Warranty 3 years) |
| Transmission: PTO | 540 r/min |
| Transmission: direction of rotation | Schedule |
| Transmission: freewheel | √ |
| Transmission: rotor speed | 3150.0 rpm |
| Transmission: gearbox oil | Yes / SAE 120 - ISO 72925 |
| Transmission: diameter of upper pulley | 206.0 mm |
| Transmission: lower pulley diameter | 106.0 mm |
| Transmission: number of Koreas | 3 |
| Transmission: dimensions of the Koreas | AX39 |
| Rotor: diameter | 102.0 mm |
| Rotor: bearing type and dimension | SKF UCF-207 |
| Rotor: balancing | Electronic |
| Rotor: blade thickness | 8.0 mm |
| Hammers: weight | 330.0 g |
| Hammers: hole dia | 12.0 mm |
| Hammers: base width | 80.0 mm |
| Hammers: head width | 14.0 mm |
| Hammers: diagonal | 75.0 mm |
| Roll: diameter | 102.0 mm |
| Roll: sheet thickness | 6.0 mm |
| Roll: bearing type and dimension | FL205 |
| Cardan | CE 4x800 mm |
| Hood length | 665.0 mm |
| Packing dimensions | 1550.0*850.0*700.0 mm |
| IMPORTANT NOTICE |
| Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
Specific References
CARDAN SHAFT INCLUDED
CARDAN SHAFT INCLUDED
