CARDAN SHAFT INCLUDED
| Deleks products take about 15 to 30 days. |
The LINCE 120 X DELEKS Tractor Hammermill Side Shredder LINCE 120 X DELEKS is designed for tractors with power ratings from 16 to 40 HP, designed for use in gardens and agricultural fields. Forged steel hammers for cutting grass and brambles. The cutting height can be adjusted thanks to the rear roller and adjustable skids. CAT 1 universal 3-point hitch.
Its structure is made entirely of Swedish SSAB steel, rotor made of tube ARVEDI, electronically balanced, made of S355 steel, thickness 8 mm, with hammers mounted on 6 instead of 4 blades. Hammer supports in HARDOX, sKF brand rotor bearings, lombarda Ingranaggi transmission box with freewheel and 3-year warranty.
The frame is equipped with an inner curb that deflects the air flow towards the rotor for a mulching effect, the inside positioning of the roller gives more efficiency and reduces the running time: the cut grass passes over the roller without being crushed, and it is eliminated more quickly
It has mechanical sideshift for shredding outside the tractor axle. 330g forged steel hammers for cutting up to 2.5 cm in diameter, 3 heavy duty straps with external tension adjustment, rear roller and adjustable side skids.
| Working width | 1200.0 mm |
| Overall width | 1320.0 mm |
| Cutting height min/max | 10.0 - 45.0 mm |
| Weight | 183.0 kg |
| Total height | 750.0 mm |
| Tractor power | 16 - 40 hp |
| 3-point hitch | Cat. 1 (ø 19.0-22.0mm |
| Hood height | 370.0 mm |
| Distance between the lower points | 470.0 - 710.0 mm |
| Number of hammers | 20 |
| Max. cutting diameter | 20.0 - 30.0 mm |
| Ground to gearbox spacing | 472.0 mm |
| Plate thickness | 3.0 mm |
| Thickness of sheet metal on the sides | 5.0 mm |
| Skid thickness | 6.0 mm |
| Transmission type | V-belts |
| Transmission: Gearbox | Lombarda Ingranaggi Srl (Italy) (3 years warranty) |
| Transmission: PTO | 540 r/min |
| Transmission: direction of rotation | Schedule |
| Transmission: freewheel | √ |
| Transmission: rotor speed | 3150.0 rpm |
| Transmission: gearbox oil | Yes / SAE 120 - ISO 72925 |
| Transmission: diameter of upper pulley | 206.0 mm |
| Transmission: lower pulley diameter | 106.0 mm |
| Transmission: number of Koreas | 3 |
| Transmission: dimensions of the Koreas | AX39 |
| Rotor: diameter | 102.0 mm |
| Rotor: bearing type and dimension | SKF UCF-207 |
| Rotor: balancing | Electronic |
| Rotor: blade thickness | 8.0 mm |
| Hammers: weight | 330.0 g |
| Hammers: hole dia | 12.0 mm |
| Hammers: base width | 80.0 mm |
| Hammers: head width | 14.0 mm |
| Hammers: diagonal | 75.0 mm |
| Roll: diameter | 102.0 mm |
| Roll: sheet thickness | 5.0 mm |
| Roll: bearing type and dimension | FL205 |
| Cardan | CE 4x800 mm |
| Hood length | 665.0 mm |
| Packing dimensions | 1350.0*850.0*700.0 mm |
| IMPORTANT NOTICE |
| Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
Specific References
CARDAN SHAFT INCLUDED
