Hydraulic arm brush cutter PTO Giemme HRM 360 110 cm
- Type of shredder : Rear shredder
- Cutting type : Hammer
- PTO working width : 110 cm
- Tractor power : 70/100 HP
Giemme HRM 360 PTO side-mounted offset side arm shredder
The Giemme HRM mulcher is equipped with a Casappa independent hydraulic system and a 135 liter tank, this equipment offers efficient and continuous performance during long working days.
With a working width of 110 cm, this mulcher is suitable for tractors between 70 and 100 HP, making it perfect for tasks that require robustness and precision. In addition, it features a height-adjustable roller and a control system with flexible cables, providing comfortable and adaptable use in various ground conditions.
The design includes a category I-II universal 3-point linkage and comes with an 800 mm T5 cardan shaft with safety screw, ensuring a reliable and secure connection to the tractor.
With a weight of 650 kg and 28 hammers, the Giemme HRM is an efficient solution for shredding branches and dense vegetation, optimizing maintenance and cleaning work in different environments.
Features
Working width | 110 cm |
Tractor power | 70/100 HP |
Weight | 650 kg |
Hammers | 28 |
Tank | 135 L |
Minimum tractor weight | 2500 kg |
Dimensions
|
![]() |
IMPORTANT NOTICE |
It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the moment of reception, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
This tractor shredder includes a hammer cutting system. You also have the option of ordering a blade system by calling our customer service department. |
Data sheet
- Shredder type
- Shredder with side arm
- Type of cut
- Hammers
- Working width PTO
- 110 cm
- Tractor power
- 70 - 100 HP
- Multifunction
- Yes
- Cardan shaft
- Including
- Displacement
- Hydraulic
- Robustness
- Heavy
- Number of hammers
- 28
- Working width (cm)
- 110 - 119 cm
- Country of manufacture
- Italy
- Weight
- 650 kg
Specific References
- MPN
- M1.V5.HRM1
Agricultural Machinery After-Sales Service
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Warranty and Factory Repair
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
Online Mechanics - Fast and Efficient
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips.
Workshop repair
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
☎️ Always by your side
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.
✔️ Advantages of buying in the Spanish territory
- National warranty: By purchasing from authorized distributors throughout Spain, you are assured of receiving a 100% Spanish warranty for your products.
- Local after-sales service: In case of any inconvenience or need for after-sales service, you will have a more efficient and accessible support when purchasing within Spain.
❌ Disadvantages of buying outside Spanish territory
- Complicated warranty management: Buying products outside Spain can make warranty management difficult, as there may be problems with the Spanish serial number or delays in the process.
- Limited after-sales service: The availability of after-sales service may be limited or less accessible when purchasing products abroad.
- Tax declaration: When purchasing products outside Spain, customers may be required to make an additional tax declaration, such as an intra-community purchase, which may involve additional tax formalities.
Review
5 other products
PTO Side Shredder GEO ITALY AGD 155 - 175 cm
- Weight : 380 - 410 kg
- Power Supply pTO tractor
- Working width PTO : 155 - 175 cm
- Cardan shaft : Yes
- Robustness : Medium
- Min. tractor power : 50 - 80 HP
- Number of hammers : 24 - 28
- Country of manufacture : Italy
CARDAN SHAFT INCLUDED
€3,060.49 VAT incl.
Tractor shredder Dimago 120 with collector
- Tractor power: 20-50HP
- Working width 1.2m
- Hammer cutting system
- Weight: 323Kg
€2,512.15 VAT incl.
Shredder for Mini Tractor Dimago 125 42 blades
- Tractor power: 16 - 26 HP
- Working width: 1,25 m
- Cutting system: blades
- Blades: 42
€1,361.23 VAT incl.
Heavy-duty side flail mower PTO GEO ITALY AGF 140 - 220 cm
- Weight : 550 - 710 kg
- Power supply : PTO tractor
- Working width PTO : 140 - 220 cm
- Cardan shaft : Yes
- Robustness : Medium
- Min. tractor power : 50 - 80 HP
- Number of hammers : 12 - 22
- Country of manufacture : Italy
- CARDAN SHAFT INCLUDED
€3,495.28 VAT incl.
Hammer crusher for tractor Deleks LEOPARD-160-SPH 40-70HP
- Tractor power: 40 - 70 HP
- Cutting height: 10 - 45 mm
- Total width: 1740.5 mm
- Number of hammers: 24
€2,775.48 VAT incl.
Product Reviews / Q&A
-
Reviews (0)
-
Questions & Answers (0)
-
Latest
-
Latest