Unified reduction for DELEKS power take-off
- Unified reduction for DELEKS power take-offs
€50.50 VAT incl.
CARDAN SHAFT INCLUDED
Deleks products take about 15 to 20 days. |
The INTERFILA brushcutter is a model that is designed for work in meadows, gardens or vineyards. It moves hydraulically on the lateral sides and thanks to the robust 4mm chassis, this brushcutter can cut vegetation up to 4-5 cm thick.
This model is attached to the tractor with a reinforced steel 3-point hitch and for tractors from 40 to 70 HP, it also has a CAT 1-2 3-point hitch.
It has a Lombarda Ingranaggi transmission box with free wheel with 3 years warranty, it also has a double slat side disc, it has an automatic reverse by means of a feeler cable.
Its hammers are made of forged steel of 820g for a vegetation of 4-5 cm thick, the oil tank has a capacity of 18 L, its rear roller is 140 mm diameter, it has 3 high resistance belts, with an external adjustment of the tension.
It has an electronically balanced rotor, its roller and side skids are adjustable.
Working width | 1670.0 mm |
Total width | 2100.0 mm |
Cutting height min/max | 5. - 55 mm |
Weight | 360 kg |
Total height | 830 mm |
Tractor power | 40 - 70 HP |
3-point hitch | Cat. 1-2 (ø 19-22mm / 25-28mm) |
Hood height | 370 mm |
Distance between lower points | 620 - 920 mm |
Number of hammers | 26 |
Max. cutting diameter | 40 - 50 mm |
Total length | 1650 mm |
Ground clearance to gearbox | 400 mm |
Plate thickness | 5 mm |
Sheet thickness at sides | 6 mm |
Thickness of skids | 6 mm |
Transmission type | V-belts |
Transmission: Gearbox | Lombarda Ingranaggi 540 r/min |
Transmission: PTO | 540 r/min |
Transmission: direction of rotation | Schedule |
Transmission: freewheel | √ |
Drive: rotor speed | 2295 rpm |
Transmission: gearbox oil | Yes / Shell Spirax S2 A 80W-90 |
Transmission: upper pulley diameter | 170 mm |
Transmission: lower pulley diameter | 120 mm |
Drive: number of cores | 3 |
Drive: dimensions of cores | 17x1092 |
Rotor: diameter | 108 mm |
Rotor: bearing type and dimension | UC207 |
Rotor: balancing | Electronic |
Rotor: blade thickness | 8 mm |
Hammers: weight | 820 g |
Hammers: hole dia | 15 mm |
Hammers: base width | 82 mm |
Hammers: head width | 45 mm |
Hammers: diagonal | 95 mm |
Roll: diameter | 140 mm |
Roll: sheet thickness | 4 mm |
Roll: bearing type and dimension | UC205 |
Cardan | CE 4x800 mm |
Hood length | 750 mm |
Horizontal displacement | 280 mm hydraulic |
Packing dimensions | 185 x 105 x 95 cm |
Data sheet
Specific References
CARDAN SHAFT INCLUDED
CARDAN SHAFT INCLUDED
CARDAN SHAFT INCLUDED
Cardan shaft included