| Deleks products take about 15 to 30 days. |
The hammer shredder Deleks APE-100 is specially designed for tractors with low power from 12 to 30 HP. This model of mulcher is used for gardens and agricultural fields.
The APE-100 model has forged hammers for grass and small brambles. It has an adjustable cutting height thanks to the adjustable rear roll. It also has a category 1 fixed 3-point hitch .
Among its features and advantages we can highlight its good structure completely made of Swedish SSAB steel. It also offers a rotor made of ARVEDI (Cremona) tube , electronically balanced.
It can be used on tractors with low power in gardens and orchards thanks to its light weight of 105kg. It is equipped with a Lombarda Ingranaggi Srl transmission box with a freewheel. It also comes with an adjustable rear positioned roll.
The APE-100 hammer shredder offers an external belt tension adjustment. The model comes with CE gimbal included. In addition, it also includes HARDOX hammer supports.
This hammer brushcutter model from Deleks ensures good operator comfort and ease of operation. This is thanks to its outstanding features.
Among these we can highlight the total width of 1150mm and the working width of 1000mm. We can also highlight the cutting height of 20 - 35 mm and the overall height of 623 mm. It has a total light weight of only 105 kg.
| Working width | 1000 mm |
| Total width | 115 mm |
| Cutting height min/max | 20 - 35 mm |
| Weight | 105 kg |
| Total height | 623 mm |
| Tractor power | 12 - 30 HP |
| 3-point hitch | Cat. 1 (ø 19-22mm) |
| Hood height | 317 mm |
| Distance between lower points | 380 - 580 mm |
| Number of hammers | 24 |
| Max. cutting diameter | 10 - 20 mm |
| Total length | 640 mm |
| Space between ground and transmission box | 385 mm |
| Plate thickness | 3 mm |
| Sheet thickness on sides | 3 mm |
| Transmission type | V-belts |
| Transmission: Gearbox | Lombarda Ingranaggi Srl |
| Transmission: PTO | 540 r/min |
| Transmission: direction of rotation | Schedule |
| Transmission: freewheel | √ |
| Drive: rotor speed | 3000 rpm |
| Transmission: gearbox oil | Yes / SAE 120 - ISO 72925 |
| Drive: upper pulley diameter | 185 mm |
| Transmission: lower pulley diameter | 96 mm |
| Drive: number of cores | 2 |
| Drive: dimensions of cores | AX35 (889LI) |
| Rotor: diameter | 76 mm |
| Rotor: bearing type and dimension | UCF206 |
| Rotor: balancing | Electronic |
| Rotor: blade thickness | 8 mm |
| Hammers: weight | 330.0 g |
| Hammers: hole dia | 11 mm |
| Hammers: base width | 80 mm |
| Hammers: head width | 14 mm |
| Hammers: diagonal | 75 mm |
| Roll: diameter | 85 mm |
| Roll: sheet thickness | 6.3 mm |
| Roll: bearing type and dimension | UCFL204 |
| Cardan | CE 2x800 mm |
| Hood length | 525 mm |
Data sheet
Specific References
CARDAN SHAFT INCLUDED
INCLUDES PTO SHAFT
GIMBAL INCLUDED
