Unified reduction for DELEKS power take-off
- Unified reduction for DELEKS power take-offs
€50.50 VAT incl.
CARDAN SHAFT INCLUDED
Deleks products take about 15 to 30 days. |
The DELEKS BISON 260 900 kg tractor shredder is made for large areas, it is suitable for any brand of tractor with a power of 90-130 HP, it has a very solid and robust construction, perfect for the maintenance of fruit fields, fallow land, green manure processing, corn and sunflower stalks, straw, soybeans, grass, etc.
It has aworking width of 2.6m, its weight is around 900 kg, it has a 4-belt transmission, a thick double-plate frame with a thick lined structure, it has a 2nd category fixed three-point hitch, besides having fixed front counter-blades.
Box with freewheel device and openable rear cover for maintenance. Rotor with triple blades, protected supports and lateral protections, tools 28 x 3 blades and a rear roller of 220 mm diameter.
Working width | 2600.0 mm |
Total width | 2750.0 mm |
Cutting height min/max | 10.0 - 100.0 mm |
Weight | 900.0 kg |
Total height | 1100.0 mm |
Tractor power | 90 - 130 hp |
3-point hitch | Cat. 2 (ø 25.0-28.0 mm) |
Hood height | 550.0 mm |
Distance between lower points | 750.0 - 940.0 mm |
Max. cutting diameter | 30.0-40.0 mm |
Total length | 1150.0 mm |
Space between ground and transmission box | 650.0 mm |
Plate thickness | 5.0 mm |
Sheet thickness at sides | 8.0 mm |
Transmission type | V-belts |
Transmission: Gearbox | Lombarda Ingranaggi Srl |
Transmission: PTO | 540 r/min |
Transmission: direction of rotation | Schedule |
Transmission: freewheel | √ |
Transmission: rotor speed | 1790.0 rpm |
Transmission: gearbox oil | Yes / SAE 120 - ISO 72925 |
Transmission: number of cores | 4 |
Transmission: dimensions of cores | 17x1650 |
Rotor: diameter | 205.00 mm |
Rotor: bearing type and dimension | UK211+H2311 |
Rotor: balancing | Electronic |
Rotor: sheet thickness | 8.0 mm |
Roll: diameter | 220.0 mm |
Roll: sheet thickness | 8.0 mm |
Roll: bearing type and dimension | UC 208 |
Number of slats | 28 x 3 |
Cardan shaft | CE 8x1200 mm + pin |
Hood length | 1100.0 mm |
Packing dimension | 2760*1250*1000.0 mm |
IMPORTANT NOTICE |
It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References
INCLUDES PTO SHAFT