Inverter welder Solter Practico 150 150A
- Maximum current: 150 A
- Usable MMA / TIG electrodes: 1,6 - 3,2 mm
- No load voltage: 62 V
- Weight: 2 Kg
€164.54 VAT incl.
The inverter multiprocess welder Wizarcs Infinity 160 with a duty cycle of 50% at 40ºC and a no-load voltage of 70V, this equipment is ideal for multiple welding modes, including MMA, TIG, FCAW and MIG MAG (from M2).
Its ability to use different wire diameters, such as the recommended 0.035" / 0.9mm and a maximum of 0.040" / 1.0mm, provides flexibility in various welding tasks.
Thanks to its TIG LIFT ARC type and 3/8" (9mm) quick connectors, the Wizarcs Infinity 160 allows you to work with ease and precision, whether electrode welding, using TIG(requiring a TIG torch, not included) or handling self-shielded or gas-shielded wires (on M2 and later versions).
Electrodes up to Ø 3,2mm and protruding for 2,5mm. |
Quick connectors 13 mm. |
||
Can be connected to generators with a minimum nominal power of 6.5Kw. |
Rubber knob, for a better grip with gloves. |
||
HYPER-ARC, with HOT START, ARC FORCE and ANTI-STICK. |
High contrast LCD display. |
Connection | 230V-50/60 Hz +/- 10% |
Amperage range - 220V | 10-160A |
Duty cycle At 40ºC | 50% |
No-load voltage (OCV - U0) | 70V |
Modes | MMA / TIG / FCAW / MIG MAG (M2 onwards) |
Recommended wire Ø | 0.035″ / 0.9mm |
Ø Maximum wire size | 0.040″ / 1.0mm |
TIG Type | TIG LIFT ARC |
Connectors | 13 mm quick connectors |
iP | IP21S |
Type of display | LED | SINERGIC + |
Knob | Large size - Soft touch |
Generators | Connectable to generators (6.5 KW - 220V) |
Extensions (Output) | Up to 10m - AWG8 |
Extensions (Input) | Up to 10m - AWG2 |
Control | Hyper Arc |
Weight | 6.5 Kg |
Dimensions | 415 x 255 x 355 mm |
Data sheet
Specific References