DELEKS FALCO HW PTO Hydraulic Hedge Trimmer
The DELEKS FALCO HW PTO Hydraulic Hedge TrimmerIt features a clearing arm with a cutting bar for pruning trees and hedges with a maximum diameter of 2 - 3 cm. It can work on both sides of the tractor and can be used at the front.
It features a forward movement of the cutting bar on the operator's side, its 3.5 m arm It allows overcoming obstacles, has a dual hydraulic pump that enables the machine's arm to move while it cuts at the same time.
The DELEKS FALCO HW PTO Hydraulic Hedge Trimmer features a symmetrical structure with double hitch with 3 points of category 1 - 2 what each allows Cutting angle on both sides of the tractor and a use on the rear and front., all this possible without having to make modifications to the machine.
It has a Innovative wireless control system that replaces the mechanical remote control with cables and sheaths.. With the standard supplied remote control, it will be possible to manage both the hydraulic pistons and the hedge trimmer bar, thus allowing the hedge trimmer to be mounted on either the rear or front of the tractor.
Your wireless system is not afraid of the rain and does not need to be recharged., except for replacing the remote control batteries when they run out.
It has a Hydraulic system managed by the wireless control that is adjustable., in this way to have a faster or smoother handling of the arm pistons.
Characteristics
| Model |
FALCO 130HW |
FALCO 160HW |
FALCO 180HW |
| Working width |
1300.0 mm |
1600.0 mm |
1800.0 mm |
| Total width |
1400.0 mm (closed) |
1400.0 mm (closed) |
1400.0 mm (closed) |
| Tractor power |
20-60 HP |
20-60 HP |
20-60 HP |
| Weight |
285.0 kg |
295.0 kg |
305.0 kg |
| Number of slats |
17 |
21 |
24 |
| Total height |
2300.0 mm |
| 3-point hitch |
Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0mm) |
| Distance between the lower points |
650.0 - 940.0 mm |
| Maximum cutting diameter |
20.0-30.0 mm |
| Total length |
400.0 mm |
| Transmission type |
Hydraulics |
| Transmission: PTO |
540 rpm (revolutions per minute) |
| Transmission: direction of rotation |
Schedule |
| Oil pressure min./max. |
120 - 150 bar |
| Optimal oil flow |
18 - 22 l/min |
| Hydraulic tubes |
WP 400 Bar |
| Packaging dimension |
150 x 80 x 200 cm |
150 x 80 x 200 cm |
150 x 80 x 200 cm |
Main dimensions
| Model |
FALCO 130HW |
FALCO 60HW |
FALCO 180HW |
| A1 |
450 cm |
480 cm |
500 cm |
| A2 |
320 cm |
320 cm |
320 cm |
| B1 |
370 cm |
370 cm |
370 cm |
| B2 |
520 cm |
550 cm |
570 cm |
| C1 |
280 cm |
280 cm |
280 cm |
| C2 |
100 cm |
100 cm |
100 mm |
|
 |
| IMPORTANT NOTICE |
|
| Mandatory on the part of the client, review oil levels and lubrication before startup. If the goods cannot be checked at the time of receipt, it should be noted on the carrier's sheet that the customer is in agreement. except for pending exam. |
