Hydraulic cutting bar Deleks HR-130 1300mm
- Cutting width: 1300 mm
- Number of blades: 17
- Cutting diameter: 25 mm
- Weight: 58 kg
€1,269.57 VAT incl.
Deleks products take about 15 to 20 days. |
DELEKS FALCO HW Hydraulic Hedge Trimmer PTO DELEKS FALCO HWHas a cutter bar brushcutter arm for pruning trees and hedges with a maximum diameter of 2 - 3 cm. It can work on both sides of the tractor and can be used at the front.
It has a forward movement of the cutterbar at the operator's side, its 3.5 m arm it has a double hydraulic pump that allows the machine arm to move and at the same time the machine to cut.
The DELEKS FALCO HW Hydraulic PTO Hedge Trimmer features a symmetrical structure with double coupling to 3 points of category 1 - 2 that allows each cutting angle on both sides of the tractor and one use at rear and front, all of this possible without having to make any modifications to the machine.
It has a innovative wireless control system replaces mechanical remote control with cables and holsters. With the remote control supplied as standard, it will be possible to manage both the hydraulic pistons and the hedge trimmer bar, thus allowing the hedge trimmer to be mounted on the rear or front of the tractor.
Your wireless system is not afraid of rain and does not need recharging, except for replacing the remote control batteries when they run out.
It has a hydraulic system managed by the wireless control which is adjustable, this allows for faster or smoother operation of the arm pistons.
Model | FALCO 130HW | FALCO 160HW | FALCO 180HW |
Working width | 1300.0 mm | 1600.0 mm | 1800.0 mm |
Overall width | 1400.0 mm (closed) | 1400.0 mm (closed) | 1400.0 mm (closed) |
Tractor power | 20-60 HP | 20-60 HP | 20-60 HP |
Weight | 285.0 kg | 295.0 kg | 305.0 kg |
Number of blades | 17 | 21 | 24 |
Total height | 2300.0 mm | ||
3-point hitch | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0mm | ||
Distance between the lower points | 650.0 - 940.0 mm | ||
Max. cutting diameter | 20.0-30.0 mm | ||
Total length | 400.0 mm | ||
Transmission type | Hydraulics | ||
Transmission: PTO | 540 r/min | ||
Transmission: direction of rotation | Schedule | ||
Oil pressure min/max | 120 - 150 bar | ||
Optimal oil flow | 18 - 22 l/min | ||
Hydraulic hoses | WP 400 Bar | ||
Packing dimensions | 150 x 80 x 200 cm | 150 x 80 x 200 cm | 150 x 80 x 200 cm |
|
IMPORTANT NOTICE |
Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
Specific References