The hammer brushcutter Anova DM600 has an engine Anova Euro V with a power of 6.5HP. This Anova model offers a working width of 60cm and an adjustable height of more than 30mm.
The hammer brushcutter has a cutting unit with rotor and 32 floating hammers. This model uses freewheels for the front wheels and 13x500-6" for the rear wheels.
The DM600 hammermill brushcutter is belt driven. It features a tensioned belt clutch and independent steering. It also has extreme versatility thanks to its gearbox with three speeds, two forward and one reverse. It weighs only 130 kg.
This powerful hammer brushcutter model guarantees excellent cleaning of the soil, orchards and vineyards. Thanks to its efficient and powerful cutting unit, and also thanks to the large working width, we can perform an excellent cleaning.
| Engine | Anova Euro V |
| Displacement | 223 cc |
| Power | 6,5 HP |
| Gears | 2+1 gears |
| Transmission | Belts |
| Blade speed | 2.820 rpm |
| Working width | 600mm |
| Starting system | Manual |
| Crushing system | 32 floating hammers |
| Traction | Self-propelled |
| Rear wheels | 13×5.00-6 pneumatic tires |
| Front wheels | Freewheeling |
| Performance | Up to 1.750m² |
| Protection system | Projection |
| Handlebar | Height adjustable |
| System | Centralized height adjustment |
| Gearbox oil quantity | 1,6 L |
| Engine oil quantity | 0,6 L |
| Weight | 130 Kg |
 |
 |
| IMPORTANT It is mandatory for the customer to check oil and grease levels before start-up ! |
| If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement, unless an examination is pending. |
Data sheet
Specific References
