The firewood chipper Ceccato Olindo SPLE 11 POL is equipped with a 4-stroke gasoline engine from the prestigious manufacturer Honda with a power of 6.5 horsepower. The engine has 196 cubic centimeters and works at 3600 revolutions per minute in order to deliver that power.
The SPLE 11 POL wood chipper has the possibility of working in 3 different positions and thanks to its 50 cm piston stroke, we can cut logs up to 54 centimeters long. As for its hydraulic oil tank, the capacity of this firewood splitter is 7 liters.
Finally, it has support bars to contain the logs as well as a 20 cm wheeled trolley for easy transport of the machine.
| Engine | Honda GX 200 |
| Power | 6,5 HP |
| Fuel | Gasoline |
| Engine speed | 3600 rpm |
| Engine type | 4-stroke |
| Displacement | 196 cc |
| Type | multi-position steerable |
| Dual speed | Yes |
| Force | 11 tons |
| Piston stroke | 50 cm |
| Cut to ground | Yes |
| Maximum trunk diameter | 50 cm |
| Maximum trunk length | 50 cm |
| Pump type | single |
| Flow rate per minute | 9.5 l/min |
| Maximum pressure | 180 BAR |
| Oil tank | Yes |
| Hydraulic cylinder outer diameter | 80 mm |
| Piston rod diameter | 40 mm |
| Piston speed | 7.5 cm/s - 3.1 cm/s |
| Rising speed | 6.3 cm/s |
| Quantity of hydraulic oil required | 7 liters |
| Upper lever for hand protection | Yes |
| Support bars to contain the logs | Yes |
| Transport trolley with wheels | Yes |
| Log lifting system | No |
| Product dimensions | 50 x 95 x 170 cm |
| Net weight | 135 Kg |
| Packing dimensions | 50 x 95 x 180 cm |
| Total packing weight | 138 Kg |
| IMPORTANT NOTICE |
| It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips.
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.
