The Centauro TP650 mulcher is equipped with a powerful 6.5 HP gasoline engine Loncin G200F that rotates the machine's drum rotor to shred the branches. These branches must have a maximum diameter of 100 mm for the machine to process them correctly.
The ignition mode of this bio shredder is through the action of pulling a rope attached to a puller. The transmission of the power generated by this motor to the shredder rotor is done by means of a centrifugal clutch and the use of V-belts.
As a fact to be taken into account is that it has pneumatic wheels and we can direct the output of the shredded remains in any direction thanks to its 360 degrees rotation of the chimney. The weight of this machine is 93 kilograms and it has grip points on the hopper to facilitate its displacement.
Last but not least, the Centauro TP650 mulcher has an emergency safety switch located at the rear of the hopper as well as an easily accessible emergency stop bar on top of the hopper.
| MODEL | TP650 |
| Engine | Loncin G200F 4-stroke |
| Power | 4.75 kW - 6.5 HP |
| Transmission | centrifugal clutch with Kevlar double V-belt |
| Starter | Manual with rope-tied puller |
| Shredding mode | Single stage |
| Shredding elements | Drum (2 blades + 1 anvil) |
| Maximum cutting diameter | 100 mm |
| Discharge outlet type | 360 degree rotation |
| Safety systems | Emergency switch and bar located in the mouth above the hopper |
| Rubber wheels | 4.10 / 3.50 - 4 |
| Easy to transport the machine | Gripping points on hopper |
| Weight | 93 kg |
| Packing dimensions | 900 x 580 x 870 mm |
| IMPORTANT NOTICE |
| It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the moment of reception, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
Specific References
