2T oil blend 1 liter Anova
- Size: 1 liter
- Base: Synthetic
- Designed for agricultural machinery engines with a 50:1 mix
€13.59 VAT incl.
The brushcutter Oleo Mac Sparta 441 T has a 2-stroke Emak Euro 2 engine. This engine has a catalytic exhaust, making harmful gases harmless to the environment.
The emak Euro 2 engine provides us with 2.1HP-1.6kW power and a total displacement of 40.2cc. This model offers a minimum speed of 2800rpm and a maximum speed of 11700rpm with an hourly power consumption at maximum power of 780g/h.
The brushcutter is equipped with a digital ignition system with a Walbro coil and a NGK BPMR7A spark plug. The Power Supply and lubrication system of this machine is composed by a walbro carburetor. In addition to having a paper air filter with a fuel collection diode.
This model includes a transmission bar with 28mm diameter and 8mm steel drive shaft. This transmission rod has a length of 1556mm with M10 male thread connection to the gearbox.
This brushcutter produces a sound pressure of only 98db(A) and a power level of 107db(A). The vibration level of the brushcutter Sparta 441 T in operation are 6.0/5.5 m/s².
The brushcutter Sparta 441 THas a double harness and anti-vibration system in the engine for the user's comfort. It also has an Ergonomic handlebar on the front handle and a standard one with rubber grip.
The 3-tooth cut-off wheel Ø 10"/255 mm with a thickness of 1.8 mm is the optional wheel. The Load & Go nylon head Ø130 mm with a 3.0 mm cutting edge is standard on this machine. It is also equipped with a 420Ø plastic guard.
It also comes standard with a clutch with two Ferodo elements with a size of 75mm by 18mm. This brushcutter has an unattached weight of 9.5kg, with a power to weight ratio of 5.9kg/kW.
Engine | Emak EURO 2 |
Power | 2.1HP - 1.6kW |
Displacement | 40.2cc |
Minimum regime | 2800rpm |
Maximum speed | 11700rpm |
Hourly consumption (max. power) | 780g/h |
Startup | Digital |
Coil | Walbro |
Spark plug | NGK BPMR7A |
Carburetor | Walbro |
Fuel tank capacity | 0.75L |
Air filter | Paper + fuel collecting diode |
Transmission tube Ø | 28mm |
Drive shaft Ø | 8mm Steel |
Long transmission tube | 1500mm |
Reducer Box | Connection with M10 male thread |
Clutch | 2 elements with FERODO (75 x 18mm) |
Harness | Double |
Front Handle | Ergonomic Handlebar |
Rear Handle | Standard with rubber grip |
Cutting disc (optional) | 3 teeth Ø 10"/255 mm thickness 1.8 mm |
Nylon head | Load & Go Ø130 mm cutting edge 3.0 mm |
Cutting protection | Plastic (420mm) |
Weight (without cutting tools and protection) | 9.5 kg |
Power-to-weight ratio | 5.9 kg/kW |
Includes |
||
Three-pronged disc |
Double harness |
Semi-automatic head |
INTERMACHINE OFFER
The brushcutter pack includes accessories that complement the machine. You can buy this pack at half price if you buy it together with the brushcutter.
Previously 69,00€Now 34,50€
IMPORTANT Oil level and lubrication must be checked by the customer before start-up! |
If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References