The brushcutter Oleo Mac BCH 250 T is equipped with a 2-stroke Emak Euro 5 engine . This engine has a catalytic exhaust, making the noxious gases harmless to the environment.
The BCH 250 T is equipped with an Emak Euro 2 engine which provides us with 1.2HP-0.9kW power and a total displacement of 25.4cc. This model offers a minimum speed of 3100rpm and a maximum speed of 10500rpm with an hourly consumption at maximum power of 485g/h.
The brushcutter has a digital ignition system with a digital coil and a Torch L8RTF spark plug. The power and lubrication system of this machine consists of a Ruixing H619 carburetor. In addition to having a paper air filter.
This model includes a 26mm diameter drive rod and an 8mm steel drive shaft. This transmission bar has a length of 1520mm with M10 male threaded bolt connection to the gearbox.
This brushcutter Oleo Mac BCH 250 T produces a sound pressure of only 98db(A) and a power level of 114db(A). The vibration level of the BCH 250 T in operation is 5.3/5.5 m/s².
The BCH 250 T brushcutter is equipped with a single harness and an anti-vibration system on the deck for user comfort. It also ensures comfort with a handlebar.
The 3-tooth cutting disc Ø 255 mm is the standard disc. The Load & Go nylon head Ø110 mm with a 2.4 mm cutting edge is standard on this machine. It also has a plastic guard.
A 54 mm clutch is also standard. This brushcutter has a weight without attachments of 6.4Kg, with a power to weight ratio of 7.1kg/kW.
| Engine | Emak EURO 5 |
| Power | 1.2HP - 0.9kW |
| Displacement | 25.4cc |
| Minimum engine speed | 3100rpm |
| Maximum speed | 10500rpm |
| Hourly consumption (max. power) | 485g/h |
| Start | Digital |
| Coil | Digital |
| Spark Plug | Torch L8RTF |
| Carburetor | Ruixing H619 |
| Fuel tank capacity | 0.64L |
| Air filter | Paper |
| Transmission pipe Ø | 26mm |
| Drive shaft Ø | 8mm Steel |
| Drive tube length | 1520mm |
| Reducing box | M10 male threaded bolt connection |
| Clutch | 54mm |
| Harness | Simle |
| Handle | Handlebar |
| Cutting disc | 3 teeth Ø 255 mm |
| Nylon head | Load & Go Ø110 mm cutting edge 3,0 mm |
| Cutting guard | Plastic |
| Weight (without cutting tools and guard) | 6.4 kg |
| Weight/power ratio | 7.1 kg/kW |
Including |
||
Three-point blade  |
Double harness |
Semi-automatic head |
INTERMAQUINAS OFFER 
The brushcutter pack includes accessories that complement the machine. You can buy this pack at half price if you buy it together with the brushcutter.
Related products
| IMPORTANT It is mandatory for the customer to check oil and grease levels before start-up ! |
| If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement, unless an inspection is pending. |
Data sheet
Specific References
