The Brushcutter Oleo Mac BCH 400 Thas a 2-stroke Emak Euro 5 engine. This engine has a catalytic exhaust, making harmful gases harmless to the environment.
The tool has a emak Euro 2 engine provides us with 2.0HP-1.5kW power and a total displacement of 40.2cc. This model offers a minimum speed of 3000rpm and a maximum speed of 10,400rpm with an hourly consumption at maximum power of 800g/h.
The Brushcutter Oleo Mac BCH 400 T has a digital ignition system with a digital coil and a Torch L8RTF spark plug. The Power Supply and lubrication system of this machine is made up of a ruixing H619 carburetor. In addition to having a paper air filter.
This model includes a transmission rod with 26mm diameter and an 8mm steel drive shaft. This transmission rod has a length of 1520mm with M10 male thread connection to the gearbox.
This brushcutter produces a sound pressure of only 96db(A) and a power level of 112db(A). The vibration level of the brushcutter BCH 400 T in operation is 4.5/5.7m/s².
The Brushcutter Oleo Mac BCH 400 T Has a double harness and double anti-vibration system on the carts. It also ensures comfort with a handlebar with safety lever.
The 3-tooth cutting disc Ø 255 mm is the standard disc. The nylon Tap & Go head Ø110 mm with a 2.4 mm cutting edge is standard on this machine. It is also equipped with a plastic guard.
It also comes standard with a clutch with two Ferodo elements with a size of 75mm by 18mm. This brushcutter has an unattached weight of 8.2kg, with a power to weight ratio of 5.5kg/kW.
| Engine | Emak EURO 5 |
| Power | 2.0HP - 1.5kW |
| Displacement | 40.2cc |
| Minimum regime | 3000rpm |
| Maximum speed | 10400rpm |
| Hourly consumption (max. power) | 800g/h |
| Startup | Digital |
| Coil | Digital |
| Spark plug | Torch L8RTF |
| Carburetor | Ruixing H619 |
| Fuel tank capacity | 0.86L |
| Air filter | Paper |
| Transmission tube Ø | 26mm |
| Drive shaft Ø | 8mm Steel |
| Long transmission tube | 1520mm |
| Reducer Box | M10 male bolt thread connection |
| Clutch | 2 pieces with FERODO coated pads (75 x 18) |
| Harness | Double |
| Handle | Aluminum handlebars |
| Cutting disc | 3 teeth Ø 255 mm |
| Nylon head | Load & Go Ø110 mm cutting edge 3.0 mm |
| Cutting protection | Plastic |
| Weight (without cutting tools and protection) | 8.2 kg |
| Power-to-weight ratio | 5.5 kg/kW |
Includes |
||
Three-pronged disc  |
Double harness |
Semi-automatic head |
INTERMACHINE OFFER
The brushcutter pack includes accessories that complement the machine. You can buy this pack at half price if you buy it together with the brushcutter.
Previously 69,00€Now 34,50€
| IMPORTANT Oil level and lubrication must be checked by the customer before start-up! |
| If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References
- Battery, charger and backpack are not included
