The brushcutter Oleo Mac BC 400 T has a 2-stroke Emak Euro 2 engine. This engine has a catalytic exhaust, making harmful gases harmless to the environment.
The BC 400 T brushcutter has a emak Euro 2 engine provides us with 2.5HP-1.83kW power and a total displacement of 44cc. This model offers a minimum speed of 2800rpm and a maximum speed of 10500rpm with an hourly consumption at maximum power of 750g/h.
The brushcutter is equipped with a digital ignition system with a Walbro coil and a NGK BPMR8Y spark plug. The Power Supply and lubrication system of this machine is made up of a walbro carburetor. In addition to having a paper air filter with a fuel collection diode.
This model includes a transmission bar with 28mm diameter and 8mm steel drive shaft. This transmission rod has a length of 1556mm with M10 male thread connection to the gearbox.
This brushcutter produces a sound pressure of only 99.2dB(A) and a power level of 114db(A). The vibration level of the brushcutter BC 400 T in operation are 4.3/4.0 m/s².
The brushcutter BC 400 T has a double harness and anti-vibration system in the engine for the user's comfort. It also has an Ergonomic handlebar on the front handle and a standard one with rubber grip.
The 3-tooth cut-off wheel Ø 10"/255 mm with a thickness of 1.8 mm is the optional wheel. The Load & Go nylon head Ø130 mm with a 3.0 mm cutting edge is standard on this machine. It is also equipped with a 420Ø plastic guard.
It also comes standard with a clutch with two Ferodo elements with a size of 75mm by 18mm. This brushcutter has a weight without attachments of 8.3kg, with a power to weight ratio of 4.53kg/kW.
| Engine | Emak EURO 2 |
| Power | 2.5HP - 1.83kW |
| Displacement | 44cc |
| Minimum regime | 2800rpm |
| Maximum speed | 10500rpm |
| Hourly consumption (max. power) | 750g/h |
| Startup | Digital |
| Coil | Walbro |
| Spark plug | NGK BPMR8Y |
| Carburetor | Walbro |
| Fuel tank capacity | 0.75L |
| Air filter | Paper + fuel collecting diode |
| Transmission tube Ø | 28mm |
| Drive shaft Ø | 8mm Steel |
| Long transmission tube | 1500mm |
| Reducer Box | Connection with M10 male thread |
| Clutch | 2 elements with FERODO (75 x 18mm) |
| Harness | Double |
| Front Handle | Ergonomic Handlebar |
| Rear Handle | Standard with rubber grip |
| Cutting disc (optional) | 3 teeth Ø 10"/255 mm thickness 1.8 mm |
| Nylon head | Load & Go Ø130 mm cutting edge 3.0 mm |
| Cutting protection | Plastic (420mm) |
| Weight (without cutting tools and protection) | 8.3 kg |
| Power-to-weight ratio | 4.53 kg/kW |
Includes |
||
Three-pronged disc |
Double harness |
Semi-automatic head |
INTERMACHINE OFFER
The brushcutter pack includes accessories that complement the machine. You can buy this pack at half price if you buy it together with the brushcutter.
Previously 69,00€Now 34,50€
| IMPORTANT Oil level and lubrication must be checked by the customer before start-up! |
| If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References
This multifunction brushcutter does not include any standard attachment.
