The brushcutter Oleo Mac Sparta 441 BP is equipped with a 2-stroke Emak Euro 2 engine . This engine has a catalytic exhaust, making the harmful gases harmless to the environment.
The Emak Euro 2 engine provides 2.1HP-1.6kW power and a total displacement of 40.2cc. This model offers a minimum speed of 2800rpm and a maximum speed of 11700rpm with an hourly consumption at maximum power of 750g/h.
The brushcutter has an electronic capacitive ignition system with a NGK CMR7H spark plug. The Power Supply and lubrication system of this machine consists of a Walbro carburetor. It also has a paper air filter with a fuel collection diode.
This model includes a 26mm diameter drive rod and a 7mm steel drive shaft. This transmission bar has a length of 1485mm with M10 male thread connection to the gearbox.
This brushcutter produces a sound pressure of only 100db(A) and a power level of 114db(A). The vibration level of the Sparta 441 BP brushcutter in operation is 3.85/4.4 m/s².
The Sparta 441 BP brushcutter features back support with padded shoulder straps. It also has a loop on the front handle and a standard one on the rear handle with safety lever.
The 3-tooth cut-off wheel Ø 10"/255 mm with a thickness of 1.8 mm is the standard wheel. The Load & Go nylon head Ø130 mm with a 3.0 mm cutting edge is standard on this machine. It is also equipped with a 390Ø plastic guard.
A centrifugal clutch with 4100 r/min engagement is also standard. This brushcutter has a weight without accessories of 9.5Kg, with a power to weight ratio of 5.9kg/kW.
| Engine | Emak EURO 2 |
| Power | 2.1HP - 1.6kW |
| Displacement | 40.2cc |
| Minimum engine speed | 2800rpm |
| Maximum speed | 11700rpm |
| Hourly consumption (max. power) | 750g/h |
| Start | Electronic capacitive |
| Spark plug | NGK CMR7H |
| Carburetor | Walbro |
| Fuel tank capacity | 0.75L |
| Air filter | Paper + fuel collector diode |
| Transmission tube Ø | 26mm |
| Drive shaft Ø | 7mm Steel |
| Drive tube length | 1485mm |
| Reducing box | Connection with M10 male thread |
| Clutch | Centrifugal with engagement at 4100 r/min |
| Harness | Back support with padded shoulder straps |
| Front handle | Loop |
| Rear handle | Standard with safety lever |
| Cutting disc | 3 teeth Ø 10"/255 mm thickness 1.8 mm |
| Nylon head | Tap & Go Ø130 mm cutting edge 3,0 mm |
| Cutting guard | Plastic |
| Weight (without cutting tools and guard) | 9.5 kg |
| Weight/power ratio | 5.9 kg/kW |
Including |
|
Three-point blade |
Semi-automatic head |
INTERMAQUINAS OFFER 
The brushcutter pack includes accessories that complement the machine. You can buy this pack at half price if you buy it together with the brushcutter.
Before 69,00€Now 34,50€
Data sheet
Specific References
- Battery, charger and backpack are not included
