The brushcutter Oleo Mac SPARTA 250 Thas a 2-stroke Emak Euro 2 engine. This engine has a catalytic exhaust, making harmful gases harmless to the environment.
The Sparta 250 Thas aemak Euro 2 engine provides us with 1.0HP-0.8kW power and a total displacement of 25.4cc. This model offers a minimum speed of 2800rpm and a maximum speed of 10000rpm with an hourly consumption at maximum power of 480g/h.
The brushcutter Oleo Mac SPARTA 250 T has a digital ignition system with a NGK BPMR8Y spark plug. The Power Supply and lubrication system of this machine is made up of a walbro WYL-245B carburetor. In addition to having a paper air filter with a fuel collection diode.
This model includes a transmission bar with 24mm diameter and a 7mm steel drive shaft. This drive rod has a male M8 threaded connection to the gearbox. It also has a single handlebar.
This brushcutter produces a sound pressure of only 97db(A) and a power level of 109db(A). The vibration level of the brushcutter Oleo Mac SPARTA 250 T in operation is 8.4/8.1 m/s².
The 3-tooth cut-off wheel Ø 10"/255 mm with a thickness of 1.8 mm is the standard cut-off wheel. It has a nylon Tap & Go Ø130 mm head with a 3.0 mm cutting edge as standard. It also has a 390Ø plastic guard. This brushcutter has a weight without accessories of 6.2Kg.
| Engine | Emak EURO 2 |
| Power | 1HP - 0.8kW |
| Displacement | 25.4cc |
| Minimum regime | 2800rpm |
| Maximum speed | 10000rpm |
| Hourly consumption (max. power) | 480g/h |
| Spark plug | NGK BPMR8Y |
| Carburetor | Walbro WYL-245B |
| Fuel tank capacity | 0.75L |
| Air filter | Paper + fuel collecting diode |
| Transmission tube Ø | 24mm |
| Drive shaft Ø | 7mm Steel |
| Reducer Box | Connection with M8 male thread |
| Clutch | 2 elements with FERODO (75 x 18mm) |
| Harness | Simple |
| Handle | Simple |
| Cutting disc | 3 teeth Ø 10"/255 mm thickness 1.8 mm |
| Nylon head | Load & Go Ø130 mm cutting edge 3.0 mm |
| Cutting protection | Plastic (390mm) |
| Weight (without cutting tools and protection) | 6.2 kg |
Includes |
||
Three-pronged disc |
Double harness |
Semi-automatic head |
INTERMACHINE OFFER
The brushcutter pack includes accessories that complement the machine. You can buy this pack at half price if you buy it together with the brushcutter.
Previously 69,00€Now 34,50€
| IMPORTANT Oil level and lubrication must be checked by the customer before start-up! |
| If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Documents
Data sheet
Specific References
| get the KIT of battery + charger and save 153,88 €! |
This multifunction brushcutter does not include any standard attachment.
