The brushcutter Oleo Mac BC 530 T has a 2-stroke Emak Euro 2 engine. This engine has a catalytic exhaust, making harmful gases harmless to the environment.
The BC 530 T has emak Euro 2 engine provides us with 3.3HP-2.4kW power and a total displacement of 52.5cc. This model offers a minimum speed of 2800rpm and a maximum speed of 10500rpm with an hourly consumption at maximum power of 1200g/h.
The brushcutter is equipped with a digital ignition system with a Walbro MAU-47 coil and a NGK BPMR8Y spark plug. The Power Supply and lubrication system of this machine is made up of a walbro WT-1199 carburetor. In addition to having an on-board air filter with fluid diode.
This model includes a transmission bar with 32mm diameter and an 8mm steel drive shaft. This transmission rod has a length of 1508mm with M10 male thread connection to the gearbox.
This brushcutter produces a sound pressure of only 102.5db(A) and a power level of 114db(A). The vibration level of the brushcutter BC 530 T in operation is 6.9/7.45 m/s².
The brushcutter BC 530 T has a professional ergonomic harness and an anti-vibration system on the engine. It also ensures comfort with an ergonomic handlebar at the front and a rubber grip at the rear.
The 3-tooth cut-off wheel Ø 12"/255 mm with 3.0 mm thickness is the standard wheel. The Load & Go ExtraLife Ø130 mm nylon head with a 3.0 mm cutting edge is standard on this machine. It is also equipped with a 420Ø plastic guard.
It also comes standard with a clutch with two Ferodo elements with a size of 75mm. This brushcutter has a weight without attachments of 9.4Kg, with a power to weight ratio of 3.9kg/kW.
| Engine | Emak EURO 2 |
| Power | 3.3HP - 2.4kW |
| Displacement | 52.5cc |
| Minimum regime | 2800rpm |
| Maximum speed | 10500rpm |
| Hourly consumption (max. power) | 1200g/h |
| Startup | Digital |
| Coil | Walbro MAU-47 |
| Spark plug | NGK BPMR8Y |
| Carburetor | Walbro WT-1199 |
| Fuel tank capacity | 1.0L |
| Air filter | Card + fluid diode |
| Transmission tube Ø | 32mm |
| Drive shaft Ø | 8mm Steel |
| Long transmission tube | 1508mm |
| Reducer Box | Connection with M10 male thread |
| Clutch | 2 elements with FERODO (75 mm) |
| Harness | Ergonomic professional |
| Front Handle | Ergonomic handlebars |
| Rear Handle | Ergonomic with rubber grip |
| Cutting disc | 3 teeth Ø 12"/255 mm thick 3.0 mm |
| Nylon head | Load & Go ExtraLife Ø 130 mm cutting edge 3.0 mm |
| Cutting protection | Plastic with thread cutter (420mm) |
| Weight (without cutting tools and protection) | 9.4 kg |
| Power-to-weight ratio | 3.9 kg/kW |
Includes |
||
Three-pronged disc |
Double harness |
Semi-automatic head |
INTERMACHINE OFFER
The brushcutter pack includes accessories that complement the machine. You can buy this pack at half price if you buy it together with the brushcutter.
Previously 69,00€Now 34,50€
| IMPORTANT Oil level and lubrication must be checked by the customer before start-up! |
| If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References
- Battery, charger and backpack are not included
