Brush cutter Garland ELITE 624 QG
The Brush cutter Garland Elite 624 QG-V19 It has a very powerful engine. This provides us with a total power of 1.43 / 1050 W. This brush cutter model features a tank capacity of 0.9L and an engine displacement of 38.9 cc.
The model of Elite 624 QG-V19 brush cutter from Garland, includes a nylon head with 2 supplied cables. It also includes a thermal priming oil pump. The model weighs only 8.6 kg.
The Brush cutter Garland Elite 624 QG-V19 It guarantees us good safety and protection of the machine due to the ADR risk class. The engine of this model is a 4-stroke. It has a packaged product weight of 10 kg.
This model of brush cutter offers us a Cable diameter of 460 mm. Thanks to these features provided by the model, it guarantees us the ability to perform the work comfortably.
Characteristics
| EAN |
8414218098414 |
| Priming pump (thermal) |
Yes |
| Nylon head with 2 supplied cables |
Yes |
| Tank capacity (in l) |
0.9 |
| Displacement (in cm³) |
38.9 |
| ADR risk class |
Non-hazardous |
| Diameter of the bar (in cm) |
2.8 |
| Cable diameter (in mm) |
460 |
| Knife diameter (in mm) |
255 |
| Cutting tool supplied |
Yes |
| Instruction language |
Spanish, Portuguese, French, Italian, Greek, English. |
| Folding handlebar |
Yes |
| Product brand |
Garland |
| Number of rotations/min |
10000 |
| Number of cable outlets |
2 |
| Weight (in kg) |
8.6 |
| Power (in hp) |
1.43 |
| Power (in W) |
1.05 |
| Acoustic pressure (in dB) |
99 |
| Packaged product: height (in cm) |
184 |
| Packaged product: width (in cm) |
29 |
| Packaged product: weight (in kg) |
10 |
| Packaged product: depth (in cm) |
29 |
| Anti-vibration system |
Yes |
| Type of harness |
Double |
| Type of packaging |
Box |
| Type of engine |
4 strokes |
| Type of traceability |
Serial number |
| Supplementary sales unit |
Number of pieces |
Workplace safety
Do not operate this machine in explosive atmospheres or in the presence of flammable liquids, gases, and dust.
Do not start the machine in a closed room or enclosure. The exhaust gases and fuel vapors contain carbon monoxide and hazardous chemicals.
In the event of a gas concentration caused by insufficient ventilation, remove anything from the work area that obstructs the flow of clean air to improve ventilation, and do not return to work in the area unless you have properly ventilated the area and are certain that the ventilation is sufficient to prevent this concentration from occurring again.
The area within a 15-meter radius around the machine should be considered a risk zone where no one should enter while the machine is in operation (Safety Zone).
When necessary, use ropes and warning signs to mark the safety zone. Keep children and bystanders away while operating this machine.
Distractions can cause you to lose control. Ensure that children, people, or animals do not enter your work area.
| IMPORTANT NOTICE |
|
| Mandatory on the part of the client, review oil levels and lubrication before startup. If the goods cannot be checked at the time of receipt, it should be noted on the carrier's sheet that the customer is in agreement. except for pending exam. |
