The Crawler Dumper EuroCentauro SP MINITRANSPORTER 300 features a Loncin 4-stroke OHV gasoline engine with electric start and recoil, with a fuel tank capacity of 3.6 L. It operates with a displacement of 196 cc.
This machine operates at a noise level of 70 dBA and is equipped with a transistorized magneto ignition system.
| Engine | Loncin 4-stroke OHV forced air-cooled gasoline single-cylinder |
| Power | 6.5 HP |
| Speeds | 3 forward and 1 reverse |
| Load capacity | 300 Kg |
| Displacement | 196 cc |
| Bore x Stroke | 68 mm x 54 mm |
| Rated Power | 4100 W (5.5 HP) / 3600 RPM |
| Net Torque | 12.4 N.m / 2500 RPM |
| Idle Speed | 1400 ± 150 r/min |
| Compression Ratio | 8.5:1 |
| PTO Shaft Rotation | Yes, counterclockwise (from the PTO side) |
| Noise Level | 70 dBA |
| Ignition System | Transistorized magneto ignition |
| Starting System | Electric with recoil |
| Carburetor | Butterfly |
| Air Filter | Semi-dry, dual element, oil bath |
| Oil Tank Capacity | 0.6 L |
| Fuel Tank Capacity | 3.6 L |
| Weight | 241 Kg |
| Dimensions | 1270 x 760 x 1000 mm |
| Recommended Maximum Slope Empty | 20% |
| IMPORTANT NOTICE |
| It is mandatory for the customer to check oil and grease levels before starting the machine. If the merchandise cannot be inspected at the time of delivery, it must be noted on the carrier's sheet that the customer agrees subject to pending inspection. |
Data sheet
Specific References
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips.
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.
