The Pramac PWB2400 power station is a versatile and quiet solution for powering all types of electronic devices and small appliances when mains power is not available. With a continuous power of 2400 W and a peak power of up to 4800 W, it is ideal for camping, outdoor work, emergencies or events without access to power.
Equipped with a 2150 Wh Li-Ion LFP lithium-ion battery with a lifespan of up to 2000 cycles, this station can power everything from cell phones and laptops to small refrigerators, drills or coffee makers. Its multiple outlets - Schuko ports, USB-A, USB-C, 12V sockets and wireless charging - make it easy to connect multiple devices at the same time.
The PWB2400 can be recharged by mains, solar power or even from the car cigarette lighter, adapting to any situation. In just 1 hour it reaches 80% charge from the mains, and with 400 W solar panels, the same percentage is achieved in just 5 hours.
Its compact and robust design, with a weight of only 29 kg, allows comfortable transport without sacrificing capacity. In addition, it includes electronic protections, MPPT system for optimized solar charging and control screen to know the battery status at all times. Looking for autonomy and reliability? This station has it all.
| Output Specifications | |
|---|---|
| Continuous output power | 2400 W |
| Peak output power (1.5 s) | 4800 W |
| Frequency | 50 Hz |
| Voltage | 230 V |
| Phases | 1 |
| Battery Specifications | |
| Battery Type | Li-Ion LFP |
| Nominal voltage | 51.2 VDC |
| Life (@80% DoD) | 2000 cycles |
| Rated capacity | 2150 Wh |
| Input Specifications | |
| Maximum single phase input | 1800 W |
| Charging time @80% @80 | 1 h |
| Charging time @ 100% | 2 h |
| Maximum DC solar load | 400 W |
| Solar charging time @80% (400 W) | 5 h |
| Solar charging time @80% (200 W) | 8 h |
| Charging by car cigarette lighter (12 V) | 8 A |
| Cigarette lighter charging time @ 80% | 19 h |
| Installation Data | |
| Dimensions (L × W × H) | 496 x 266 x 350 mm |
| Weight | 29 kg |
| Discharge temp. range | -10 - 40 °C |
| Charging temp. range | 0 - 40 °C |
| Housing dimensions | 620 x 380 x 490 mm |
| Total weight with packaging | 35 kg |
| Instruments, Controls and Connections | |
| Inverter protection (short circuit, overload, overtemperature, low battery) | ✔ |
| System control panel | ✔ |
| Battery condition | ✔ |
| MPPT solar charge controller | ✔ |
| Parallel connector | ✔ |
| Connections | |
| Schuko ports AC 230 V | 4 |
| Car socket (12 V / 10 A) | 1 |
| DC 6514 (12 V / 5 A) | 2 |
| USB-A 12 W max. (5 V / 2.4 A) | 2 |
| USB-A fast 24 W max. (5/9/12 V | 3/2.2/2 A) | 2 |
| USB-C 100 W max. (5/9/12/15/20 V | 3/5 A) | 2 |
| Wireless charger | 2 |
Data sheet
Specific References
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips. Intermaquinas recommends greasing after each operation to ensure perfect performance and extend the life of the machines.
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.
