DELEKS PRI-H hydraulic rear blade for tractor
- Load capacity: 700 kg
- 2 hydraulic cylinders
- Tractor power: 50 - 90 HP
- Shovel width: 1600 - 2000 mm
Deleks products take about 15 to 25 days. |
Hydraulic rear loader for tractor DELEKS PRI-H
DELEKS PRI-H Hydraulic Rear Tractor Loader for Tractor is a shovel designed in reinforced steel in order to be able to load and transport all types of materials, such as earth, sand or even snow. It can also be used for digging and leveling a site. This model is equipped with hydraulic balancing of the shovel.
This shovel is suitable for tractors from 40 to 90 HP depending on the model. It has a 700 kg load capacity, thanks to its hydraulic cylinder, the shovel can be tilted and kept tilted in all positions, allowing it to be used as a shovel or as a leveling blade.
Your the loading blade is made of stainless steel and has a thickness of 10 mm and a cutting edge, the new design of the shovel allows a good penetration and ensures a long service life. This shovel has been innovated with a new weight distribution: The shovel is lifted in the middle so that it is not necessary to lift it very high.
In this way, the materials are allowed to fall, which makes it possible to reduce the stress on the hydraulic cylinder. This makes work is simpler and shovel longevity is increased. The arms of the shovel do not exceed the width of the shovel, which allows for a better productivity and avoids proximity to possible obstacles.
It has a safety hinge pin to prevent unintentional dropping of materials. It has a possibility of increasing from 30% to 50% of the load volume of the shovel thanks to the rear door and the upper grill (optional purchase).
Features
Model | PRI-160-H | PRI-180-H | PRI-200-H |
Overall width | 1620.0 mm | 1820.0 mm | 2020.0 mm |
Weight | 198.50 kg | 238.0 kg | 263.0 kg |
Total height | 935.0 mm | 935.0 mm | 935.0 mm |
Tractor power | 50 - 90 hp | 50 - 90 hp | 60 - 90 hp |
3-point hitch | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0 mm) | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0 mm) | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0 mm) |
Blade width | 1600.0 mm | 1800.0 mm | 2000.0 mm |
Load capacity | 700.0 Kg | ||
Load volume | 0,50 m3 | 0.56 m3 | 0.62 m3 |
Thickness of sheet metal at tip | 10.0 mm | ||
Blade plate thickness | 6.0 mm | ||
Blade height | 520.0 mm | 520.0 mm | 520.0 mm |
Depth | 800.0 mm | ||
Total depth | 1000.0 mm | ||
Plate thickness. 3-point hitch | 13.0 mm | ||
Distance between lower points | 660.0 - 935.0 mm | ||
Hydraulic hoses (2) | 1500.0 mm /1.2" AGRI, WP-400 bar | ||
Hydraulic piston ø | 80.0/30.0 mm | ||
Inclination | Hydraulics | ||
Angle of inclination | 80° | ||
Oil pressure min/max | 120 - 150 bar | ||
Optimal oil flow | 18 - 22 l/min | ||
Packing dimensions | 163 x 110 x 107 cm | 183 x 110 x 107 cm | 203 x 110 x 107 cm |
IMPORTANT NOTICE |
Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
- Working width PTO
- 1400 - 2000 mm
- Tractor power
- 40 - 90 HP
- Load capacity
- 700 kg
- 3-point hitch for tractor
- Yes
- Country of manufacture
- Italy
- Weight
- 178.5 - 263 kg
Specific References
- ean13
- 8053470230493
Agricultural Machinery After-Sales Service
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Warranty and Factory Repair
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
Online Mechanics - Fast and Efficient
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips.
Workshop repair
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
☎️ Always by your side
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.
✔️ Advantages of buying in the Spanish territory
- National warranty: By purchasing from authorized distributors throughout Spain, you are assured of receiving a 100% Spanish warranty for your products.
- Local after-sales service: In case of any inconvenience or need for after-sales service, you will have a more efficient and accessible support when purchasing within Spain.
❌ Disadvantages of buying outside Spanish territory
- Complicated warranty management: Buying products outside Spain can make warranty management difficult, as there may be problems with the Spanish serial number or delays in the process.
- Limited after-sales service: The availability of after-sales service may be limited or less accessible when purchasing products abroad.
- Tax declaration: When purchasing products outside Spain, customers may be required to make an additional tax declaration, such as an intra-community purchase, which may involve additional tax formalities.
Review
5 other products
Tractor box Deleks T-2000 with tipping mechanism
- Blade width 200cm
- Shovel height 46cm
- Load capacity 700Kg
- Mechanical tilt
€1,286.34 VAT incl.
Manual rear box for Giemme tractor TBR 140 - 180 cm
- Weight : 150 - 210 kg
- Power : 20 - 70 HP
- Country of manufacture : Italy
€1,458.50 VAT incl.
Tilting box for tractor Giemme TP 100 - 200 cm
- Weight : 80 - 180 kg
- Power : 15 - 90 HP
- Country of manufacture : Italy
€959.64 VAT incl.
Loading box for tractor Dimago 1250 16-30 HP
- Tractor power: 16-30 HP
- Tilting System
- Weight: 110Kg
- Dimensions: 1.34 x 0.90 x 0.75m
€702.06 VAT incl.
Rear bucket for Deleks BUCKET-120 tractor with rear door
- Blade width 120cm
- Shovel height 41,5cm
- Load capacity 400Kg
- Mechanical tilt
€785.72 VAT incl.
Product Reviews / Q&A
-
Reviews (0)
-
Questions & Answers (0)
-
Latest
-
Latest