DELEKS PRI-H hydraulic rear blade for tractor
Rating:
(0)
- Load capacity: 700 kg
- 2 hydraulic cylinders
- Tractor power: 40 - 90 HP
- Shovel width: 1400 - 2000 mm
| Deleks products take about 15 to 25 days. |
close
DELEKS PRI-H hydraulic rear blade for tractor
€1,208.12
DELEKS PRI-H hydraulic rear blade for tractor
The DELEKS PRI-H hydraulic rear shovel for tractor It is a shovel designed with reinforced steel in order to load and transport all types of materials, such as soil, sand, or even snow. It can also be used for digging and leveling land.. This model is equipped with hydraulic balancing of the blade.
This shovel is suitable for the tractors from 40 to 90 HP depending on the model. It features a load capacity of 700 kg, Thanks to its hydraulic cylinder, the shovel can tilt and remain inclined in all positions, allowing it to be used as a shovel or as a leveling blade.
Your The loading blade is made of stainless steel and has a thickness of 10 mm and a cutting edge., which allows for good penetration and ensures a long and durable lifespan. This shovel has been innovated with a new distribution of weights: The shovel is lifted from the middle, making it unnecessary to have a large elevation.
To thus allow the fall of the materials, which allows reduce the tension in the hydraulic cylinder. This makes that the work becomes simpler and the longevity of the shovel is increased. The arms of this do not exceed the width of the blade, which allows for a better productivity and avoid proximity to potential obstacles.
It has a safety hinge pin to prevent a possible accidental fall of materials. It features a possibility of increasing from 30 to 50% of the bucket's load volume thanks to the rear door and the upper grid (optional acquisition).
Characteristics
| Model | PRI-140-H | PRI-160-H | PRI-180-H | PRI-200-H |
| Total width | 1432.0 mm | 1620.0 mm | 1820.0 mm | 2020.0 mm |
| Weight | 178.50 kg | 198.50 kg | 238.0 kg | 263.0 kg |
| Total height | 935.0 mm | 935.0 mm | 935.0 mm | 935.0 mm |
| Tractor power | 40 - 90 hp | 50 - 90 hp | 50 - 90 hp | 60 - 90 hp |
| 3-point hitch | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0 mm) | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0 mm) | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0 mm) | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0 mm) |
| Blade width | 1400.0 mm | 1600.0 mm | 1800.0 mm | 2000.0 mm |
| Carrying capacity | 700.0 Kg | |||
| Cargo volume | 0.39 m3 | 0.50 m3 | 0.56 m3 | 0.62 m3 |
| Thickness of the sheet at the tip | 10.0 mm | |||
| Thickness of the blade sheet | 6.0 mm | |||
| Blade height | 440.0 mm | 520.0 mm | 520.0 mm | 520.0 mm |
| Depth | 800.0 mm | |||
| Total depth | 1000.0 mm | |||
| Sheet thickness. 3-point hitch | 13.0 mm | |||
| Distance between lower points | 660.0 - 935.0 mm | |||
| Hydraulic tubes (2) | 1500.0 mm /1.2" AGRI, WP-400 bar | |||
| Hydraulic pistons ø | 80.0/30.0 mm | |||
| Inclination | Hydraulics | |||
| Angle of inclination | 80° | |||
| Minimum/maximum oil pressure | 120 - 150 bar | |||
| Optimal oil flow | 18 - 22 l/min | |||
| Packaging dimension | 142 x 95 x 109 | 163 x 110 x 107 cm | 183 x 110 x 107 cm | 203 x 110 x 107 cm |
| IMPORTANT NOTICE |
| Mandatory on the part of the client, review oil levels and lubrication before startup. If the goods cannot be checked at the time of receipt, it should be noted on the carrier's sheet that the customer is in agreement. except for pending exam. |
2604248
Data sheet
- Working width PTO
- 1400 - 2000 mm
- Tractor power
- 40 - 90 HP
- Load capacity
- 700 kg
- 3-point hitch for tractor
- Yes
- Country of manufacture
- Italy
- Weight
- 178.5 - 263 kg
Specific References
- ean13
- 8053470230486
- mpn
- PRI140H
New
✔️ Advantages of making purchases in the Spanish territory
- National warranty: By purchasing from authorized distributors throughout Spain, you are assured of receiving a 100% Spanish warranty for your products.
- Local after-sales service: In case of any inconvenience or need for after-sales service, you will have a more efficient and accessible support when purchasing within Spain.
❌ Disadvantages of buying outside Spanish territory
- Complicated warranty management: Buying products outside Spain can make warranty management difficult, as there may be problems with the Spanish serial number or delays in the process.
- Limited after-sales service: The availability of after-sales service may be limited or less accessible when purchasing products abroad.
- Tax declaration: When purchasing products outside Spain, customers may be required to make an additional tax declaration, such as an intra-community purchase, which may involve additional tax formalities.
Related Product
Forklift Hitches 140-160-180-200H DELEKS
- Forklift hitches 140-160-180-200H DELEKS
€291.31
Price
excl. VAT
€352.49 VAT incl.
€352.49 VAT incl.
PRI-140 160/180/200-H DELEKS mechanical kit
- Mechanical kit PRI-140 160/180/200-H DELEKS
€86.81
Price
excl. VAT
€105.04 VAT incl.
€105.04 VAT incl.
Promotions
Review
5 other products
- -4%
-4%
Transport bucket with hydraulic tipping Geo Italy PRI
- Hydraulic tipping bucket for tractors from 16 to 100 HP.
- 2 rear hydraulic outlets.
- Universal hitch for 3rd category I and II points.
- Lower blade with tip made of special anti-torsion material with a thickness of 1 cm, which allows loading and transporting heavy material.
€662.61
Regular price
€690.22
Price
excl. VAT
€801.76 VAT incl.
€801.76 VAT incl.
- -4%
-4%
Manual dump box for tractor Giemme TB 140 - 180 cm
- Weight : 90 - 130 kg
- Power : 15 - 70 HP
- Country of manufacture : Italy
€743.82
Regular price
€774.81
Price
excl. VAT
€900.02 VAT incl.
€900.02 VAT incl.
- -4%
-4%
Reinforced rear blade for tractor DELEKS PRM-H
- Shovel width: 1600 - 2000 mm
- Tractor power: 50 - 90 HP
- Load capacity: 700 kg
- Weight: 191 - 250 kg
€943.15
Regular price
€982.45
Price
excl. VAT
€1,141.21 VAT incl.
€1,141.21 VAT incl.
- -2%
-2%
Loading box for tractor Dimago 1500 30-70 HP
- Tractor power: 30 - 70 HP
- Tilting System
- Weight 170Kg
- Dimensions 1.65 x 1.10 x 0.90m
€813.69
Regular price
€830.30
Price
excl. VAT
€984.57 VAT incl.
€984.57 VAT incl.
- -4%
-4%
Tractor box Deleks T-1600 with tipping mechanism
- Blade width 160cm
- Shovel height 46cm
- Load capacity 700Kg
- Mechanical tilt
€907.89
Regular price
€945.72
Price
excl. VAT
€1,098.55 VAT incl.
€1,098.55 VAT incl.
Product Reviews / Q&A
-
Reviews (0)
-
Questions & Answers (0)
-
Latest
-
Latest