The brushcutter Garland Elite 1021 G-V19 has a very powerful engine. This provides a total power of 2.2 HP / 1650 W. This brushcutter model has a tank capacity of 1L and a displacement of 51.6 cc.
The Elite 1021 G-V19 brushcutter model from Garland offers an idle engine speed of 3000±200 min-1. It also offers a maximum engine speed of 10,000 ± 500 min-1. The model has a weight of only 9.8 kg.
The brushcutter Garland Elite 1021 G-V19 ensures good safety and protection of the machine. The engine of this model is a 2-stroke engine. It has a packaged product weight of 11.3 kg.
This brushcutter model offers a cutting diameter of 25.5 cm. Thanks to these features provided by the model, we are guaranteed to be able to perform the work in a comfortable way.
| EAN | 8414218098483 |
| Tank capacity (in l) | 1 |
| Vibration level (m/s2) | 7,6 |
| Displacement (in cm³) | 51,6 |
| Thickness of cutting tool | Blade 1,6 mm/ Nylon wire 2,5 mm |
| Engine speed at idling speed (min-1) | 3.000 ± 200 |
| Maximum engine speed at idle (min-1) | 10.000 ± 500 |
| Fuel consumption at maximum power (kg/h) | 1,0 |
| Cutting diameter (cm) | Blade 25,5 cm / Nylon thread 42 cm |
| Language of instructions | English, Spanish, French, Italian, Portuguese, Greek and Spanish |
| Product brand | Garland |
| Weight (in kg) | 9,8 |
| Power (in hp) | 2,2 |
| Power (in W) | 1650 |
| Packaged product: height (in cm) | 184 |
| Packaged product: width (in cm) | 29 |
| Packaged product: weight (in kg) | 11,3 |
| Packaged product: depth (in cm) | 29 |
| Type of harness | Double |
| Engine type | 2-stroke |
Do not operate this machine in explosive atmospheres as well as in the presence of flammable liquids, gases and dust.
Do not start the machine in an enclosed room or enclosure. Exhaust gases and fuel vapors contain carbon monoxide and hazardous chemicals.
In the event of a gas concentration caused by insufficient ventilation, remove anything from the work area that impedes the flow of clean air to improve ventilation and do not work in the area again unless you have properly ventilated the area and it is clear to you that the ventilation is sufficient so that this concentration will not recur.
The area within a radius of 15 meters around the machine should be considered a hazardous area that no one should enter while the machine is running (Safety Zone).
When necessary, use ropes and warning signs to mark the safety zone. Keep children and onlookers away while operating this machine.
Distractions can cause you to lose control. Watch for children, people or animals entering your work area.
| IMPORTANT NOTICE |
| It is mandatory for the customer to check oil and grease levels before starting the machine. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References
