The AS 799 Rider gasoline brushcutter is designed to deliver exceptional performance on flat terrain and light slopes. Its powerful engine, combined with the hydrostatic transmission and a cutting width of 80 cm, allows it to work with an efficiency of up to 6,800 m² per hour.
In addition, its 15-liter tank ensures long periods of use without refueling, making it an ideal choice for large areas. Operator comfort and safety are guaranteed thanks to its adjustable bucket seat, which allows for an ergonomic position, and its low center of gravity that improves stability in difficult terrain.
The robust tubular frame and rear discharge blade system ensure efficient and safe work, while its flexible cutting deck guarantees optimal mulching results.
| Manufacturer | Briggs & Stratton |
| Type | Series 3 Power Built |
| Displacement | 344 cc |
| Output | 6.5 kW (8.8 hp) |
| Engine speed | 3.200 rpm |
| Engine | Four-stroke, single cylinder |
| Starter | Electric |
| Battery | 12 V, approx. 19 Ah |
| Travel mechanism | Hydrostat gear |
| Forward speed | 0-8 km/h |
| Reverse speed | 0-6 km/h |
| Area output | Approximately 6,400 m²/h |
| Turning circle | Approx. 1.2 m |
| Front axle | Oscillating housing |
| Seat | Displaceable, spring-loaded |
| Cutting device | Blade bars |
| Cutting width | 80 cm |
| Cutting height | 35-85 mm in 4 levels |
| Cutting tool drive | V-belt |
| Cutting tool coupling | Belt coupling |
| Height of vegetation | Up to approx. 60 cm |
| Weight | 204 kg |
| Packing dimensions (LxWxH) | 186 x 110 x 104 cm |
| Dimensions (LxWxH) | 170 x 87 x 96 cm |
| Max. tensile load | 100 kg |
| Max. support load | 25 kg |
| Fuel tank | 15 liters (regular unleaded gasoline) |
| Engine oil | Approx. 1.4 liter SAE 30 |
| Gear oil (hydrostat) | 1,95 liters SAE 10W30 / 10W60 |
| IMPORTANT NOTICE |
| It is mandatory for the customer to check oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References
At Intermaquinas, we make sure that your agricultural machinery always works at 100%. We offer a complete after-sales service that covers any possible incident with your equipment.
Whenever there is a warranty or factory defect, your machine will be covered: 1 year for professionals and 2-3 years for individuals. We take care of everything: we or the carrier will pick up the machinery and send it to the factory for repair or, if necessary, replacement.
To solve minor problems in the most agile way, we have our online mechanics service. Our specialized mechanics will guide you step by step over the phone to solve the breakdown quickly and easily, avoiding unnecessary trips.
If the problem is more complex or cannot be solved with telephone assistance, we take care of everything. We pick up your machine and take it to our workshop, where our specialized mechanics will repair it, whether it is light or heavy machinery. We know that many technical services are far away and that a van is not always available for transport. Carrying it by car can be uncomfortable, as well as entailing the risk of scratches or dirt. Therefore, with our pick-up service you save time and complications, ensuring that your equipment arrives in perfect condition for repair.
Our team of specialists is available to ensure that your machinery is always in the best condition. Contact us and we will help you with the fastest and most effective solution.
