Air compressor for workshop Welder Carod ENH-13/220A-8 HONDA Engine
- Starting : Electric
- Engine : HONDA
- Flow rate : 890 L/M
- Fuel : Gasoline
- Power : 13 HP
- Tank : 50 L
- Pressure : 12 bar
- Engine model : GX-390
€4,804.32 VAT incl.
The ABAC A29B 150 CM3 air compressor is a powerful 3 hp (2.2 kW) tool designed for optimum performance. With an A29B head and an air tank capacity of 150 liters, this compressor provides a maximum pressure of 10 BAR and a maximum flow rate of 320 L/min.
This compressor operates at 230V on single phase single phase at 50 Hz and operates at a low noise level of 89.1 dB(A), making it a suitable choice for quieter working environments.
With dimensions of 1375 x 420 x 950 mm and a weight of 87 kg, it is a robust and portable unit. In addition, it uses ALTAIR PRO oil to ensure high-quality performance and long-term durability in use.
Power | 3 hp / 2.2 kW |
Revolutions | 1300 rpm |
Dimensions (mm) | 1375 x 420 x 950 |
Oil | ALTAIR PRO |
Starting type | DOL |
Head | A29B |
Weight | 87 kg |
Pressure | 10 BAR |
Maximum Flow Rate | 320 L/min |
Voltage | 230 V |
Phase | Single phase |
Frequency | 50 Hz |
Sound power | 89.1 dB(A) |
Air tank capacity | 150 L |
IMPORTANT NOTICE |
It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References