4T Oil 15W40 1 Liter
- For 4-stroke gasoline engines
- Suitable for all fuel types.
- 1 liter
€14.97 VAT incl.
The Zero Turn Mower Snapper ZTX275 has a Briggs Stratton PXi Series 8270 V-Twin OHV engine capable of providing a displacement of 724 cc. In addition this model of lawn mower of this displacement, offers us a maximum power of 27 HP with two cylinders.
It provides us with a Hydro Gear EZT hydrostatic transmission. Thanks to this, the zero turn is more durable with a much simpler and easier maintenance than other transmissions. This is because the direction changes are smoother and more efficient.
This zero turn mower has a blade clutch, which is fully electric with a total of three blades. It has a Center Cut cutting system, which makes the cut of this tractor much wider and more efficient, reaching a cutting diameter of 122 cm.
The ZTX175 mower model includes as standard a cutting deck which is electro-welded in reinforced steel. It is convertible to rear discharge and with the option of side discharge.
This mower incorporates a rear discharge with mulching at a medium height, with the option to purchase high rear mulching and side discharge mulching.
The mulching kit provides a layer that reduces temperature and moisture discrepancies to the ground. This enhances the life of the soil. It is much easier to adjust the height at which you want to cut the grass. This is thanks to the thirteen different cutting heights from 38 to 110 mm
The zero turn mower Snapper ZTX275 has 11×6" wheels at the front and 20×8" wheels at the rear. These wheels ensure easy and efficient handling without much effort.
This ZTX175 mower weighs only 287 kg, with dimensions of 187 cm in length, 125 cm in width and 105 cm in height.
Engine | B&S PXi Series 8270 V-Twin OHV |
Displacement | 724 cc |
Power | 27 HP |
Number of Cylinders | 2 |
Fuel capacity | 11 L |
Cutting system | CENTRE CUT. |
Platform | electro-welded steel reinforced cutting deck |
Platform | convertible in rear discharge (standard) or side discharge (optional). |
Unloading | standard rear discharge with medium mulching included |
Cutting height | 38-110 mm |
Cutting height positions | 13 |
Mulching kit | high for optional rear discharge |
Wheels | Front 11×6" // Rear 20×8" // Rear 20×8 |
Weight | 287 Kg |
IMPORTANT It is mandatory for the customer to check oil and grease levels before start-up ! |
If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Data sheet
Specific References
- Batteries not included
- Batteries not included