Front and side herbicide bars Zeppelin
- Working width: 1050-1400 mm
- No. of nozzles: 1-2
€489.25 VAT incl.
Among the inter-row bars VG Agro we can choose the working width that varies according to the model from 3 to 8 meters. In addition, if we choose the HYPRO bar, we will obtain an improvement in the work thanks to its Hypro nozzles and its working length of 8 meters.
On the other hand, if we do not need so much working width, we can choose any of the other available models that have conventional cone nozzles and thus choose the sides and the desired working width.
If we talk about the displacement of these inter-row bars, we can choose between an inter-row bar with hydraulic displacement or manual displacement.
The VG Agro brand is always a seal of quality thanks to the components chosen for the manufacture of these products.
MODEL | HYPRO bar | AG-088 | AG-089 | AG-090 | AG-092 |
Nozzles | HYPRO | Conventional cone | Conventional cone | Conventional cone | Conventional cone |
Sides | 2 | 1 | 1 | 2 | 2 |
Scrolling | Manual | Manual | Hydraulic | Manual | Hydraulic |
Closed length (m) | 2,5 | 1,2 | 1,2 | 1,2 | 1,2 |
Open length (m) | 3,4 | 2,1 | 2,1 | 3 | 3 |
Max. application length (m) | 8 | 3 | 3 | 4 | 4 |
IMPORTANT NOTICE |
It is mandatory for the customer to check oil and grease levels before start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement unless an examination is pending. |
Cardan shaft included