Light arm shredder PTO Deleks VOLPE-165 35-55 HP
- Tractor power: 35 - 55 HP
- Cutting height: 10 - 45 mm
- Cutting width: 1870 mm
- Number of hammers: 30
€2,746.87 VAT incl.
The BullMach Ermes S tractor shredder It is a robust and versatile tool designed for agricultural work and land maintenance. This equipment stands out for its Manual lateral displacement, which makes it easy to adjust the position according to the user's needs.
Additionally, its three-point hitch system ensures quick and efficient installation on a variety of tractors. The model offers a Lateral displacement of up to 65 cm on both sides from the center, which provides flexibility in work.
Equipped with side belt transmission and a gear reducer group, it ensures durable and trouble-free operation. For greater stability, it features with a rear roller and side skates, which ensure an even cut on uneven terrain.
Additionally, the driveshaft included It facilitates the connection to the tractor, optimizing power transmission. This model is available in different working widths, allowing you to choose the most suitable option for the dimensions of the land to be worked.
Model | Ermes 85 S | Ermes 95 S | Ermes 105 S |
Cutting width | 85 cm | 95 cm | 105 cm |
Number of hammers | 14 | 14 | 18 |
Tractor power | minimum 20 HP | minimum 20 HP | minimum 20 HP |
Net weight | 158 Kg | 163 Kg | 170 kg |
Dimensions | 103 x 115 x 71 cm | 113 x 115 x 71 cm | 123 x 115 x 71 cm |
Model | Ermes 115 S | Ermes 125 S | Ermes 135 S |
Cutting width | 115 cm | 125 cm | 135 cm |
Number of hammers | 20 | 20 | 24 |
Tractor power | minimum 20 HP | 20 - 25 HP | 25 - 30 HP |
Net weight | 177 Kg | 182 Kg | 189 Kg |
Dimensions | 133 x 115 x 71 cm | 143 x 115 x 71 cm | 153 x 115 x 71 cm |
Model | Ermes 145 S | Ermes 155 S | |
Cutting width | 145 cm | 155 cm | |
Number of hammers | 24 | 24 | |
Tractor power | 25 - 30 HP | 30 - 35 HP | |
Net weight | 194 Kg | 199 Kg | |
Dimensions | 163 x 115 x 71 cm | 173 x 115 x 71 cm |
Crushable firewood | Up to 20 mm |
Series tools | Hammers |
Hammer throw | 0.3 kg |
Width of the hammers | 7.7 mm |
Counterblades | A line |
Straps | 3 |
Three-point hitch | 1st Category |
Gimbal category | 04B |
Drive shaft length | 110 cm |
IMPORTANT NOTICE |
It is mandatory for the client to check oil levels and lubrication before starting up. If the goods cannot be inspected at the time of receipt, it should be noted on the carrier's document that the client agrees pending further examination. |
Data sheet
Specific References
CARDAN SHAFT INCLUDED
CARDAN SHAFT INCLUDED