Unified reduction for DELEKS power take-off
- Unified reduction for DELEKS power take-offs
€50.50 VAT incl.
CARDAN SHAFT INCLUDED
Deleks products take about 15 to 20 days. |
The Rotovator for DFL Tractor is a light rotovator for tractors from 12 to 35 HP, this model is attached to the tractor with a universal 3-point linkage. It is designed for soil preparation in orchards or gardens.
It has a 540 r/min transmission box and a lateral chain drive. It has a robust and lightweight design, which makes this rotovator ideal for micro-tractors.
It has a reinforced sheets to ensure longevity and to be able to till in difficult conditions. It has a automatic tensioning of the chain.
The skids that the rotovator is equipped with are a height-adjustable skids and also features an adjustable rear door. Its 3-point hitch (120 mm) allows it to be moved manually.
Model | DFL95 | DFL115 | DFL135 |
Overall width | 1080.0 mm | 1280.0 mm | 1480.0 mm |
Weight | 128.0 kg | 148.0 kg | 171.0 kg |
Total height | 800.0 mm | 800.0 mm | 800.0 mm |
Tractor power | 12 - 35 hp | 14 - 35 hp | 18 - 35 hp |
3-point hitch | Cat. 1 (ø 19.0-22.0mm | Cat. 1 (ø 19.0-22.0mm | Cat. 1 (ø 19.0-22.0mm |
Position of the gearbox | 450.0 mm on the left side/ 500.0 mm on the right side | 560.0 mm on the left side/ 590.0 mm on the right side | 560.0 mm on the left side/ 590.0 mm on the right side |
Distance between lower points | 305.0 - 520.0 mm | ||
Total length | 680.0 mm | ||
Rotor: diameter | 64.0 mm | ||
Rotor: blade thickness | 6.0 mm | ||
Transmission | Chain | ||
Working width | 950.0 mm | 1150.0 mm | 1350.0 mm |
Working depth (min/max) | 120.0 - 160.0 mm | ||
Gearbox to ground clearance | 490.0 mm | ||
Cardan | CE 4x800 mm | ||
Rotor: diameter with blades | 370.0 mm | ||
Rotor: bearing type and dimensions | "GB276-6207(R) GB276-6207(L)" | ||
Rotor: No. of sections | 4 | 6 | 7 |
No. of blades in each section | 4 | ||
Number of blades | 16 | 24 | 28 |
Blades: height/ width | 180.0 / 67.0 mm | ||
Blades: curved extension | 230.0 mm | ||
Blades: distance between holes | 45.0 mm | ||
Blades: diameter holes | 13.0 mm | ||
Blades: thickness | 6.0 mm | ||
Transmission case | Lombarda Ingranaggi 540 r/min (3-year warranty) | ||
Lateral displacement | 120.0 mm manual | 120.0 mm manual | 200.0 mm |
Direction of rotation PTO | Right side (left side on request) | ||
Rotor speed | 280 rpm | ||
Case oil | Si/ SAE 120 - ISO 72925 | ||
Blades: weight | Blades: weight | ||
Packing dimensions | 80 x 120 x 65 cm | 80 x 129 x 65 cm | 80 x 149 x 65 cm |
IMPORTANT NOTICE |
Mandatory on the part of the customer, review oil and grease levels prior to start-up. If it is not possible to check the goods at the time of receipt, it must be indicated on the carrier's sheet that the customer is in agreement except for pending examination. |
Data sheet
Specific References
CARDAN SHAFT INCLUDED
CARDAN SHAFT INCLUDED