Manual cutter Husqvarna K4000
The Husqvarna K4000 handheld cutter is a professional power tool designed for fast, accurate and clean cuts in construction, renovation and installation work. Powered by power Supply by cable, it offers constant power without relying on fuel, making it a very practical option for intensive use on construction sites and in workshops.
It is equipped with a motor with 2.7 kW input power, compatible with 220-240 V, single-phase and 50-60 Hz frequency, which facilitates its use in most professional environments. Its stable performance allows it to work reliably in demanding tasks such as openings, grooving and cutting of hard materials.
On the cutting side, the K4000 can handle a blade of up to 350 mm (inside diameter 25.4 mm and maximum thickness 5.6 mm) and achieves a maximum cutting depth of 125 mm, ideal for work in concrete, masonry or other materials commonly used on site.
In addition, it can work with wet or dry cooling, adapting to the need for dust control, cleaning of the cut or availability of water at the work site. The maximum perimeter speed of 100 m/s contributes to efficient and continuous cutting.
Its compact format makes it easy to handle: 631 mm long, 221 mm wide and 313 mm high, with a weight of 7.6 kg, balancing robustness and maneuverability for freehand cutting. It is also an advantage in jobs where mobility or access to narrow areas is required.
In terms of comfort and control, it registers vibrations of 3.5 m/s² in both handles, providing more stable handling during work. In terms of noise, it has a guaranteed 105 dB(A) LWA and 95 dB(A) sound pressure at the operator's ear, key data for planning use with adequate protection in professional environments.
The Husqvarna K4000 is a manual cutter designed for those looking for real electrical power, deep cutting capacity and wet/dry flexibility in a compact machine that is ready for the pace of the job site.
Technical Data
| MODEL |
K4000 (967 07 98-01) |
| Power source power Supply |
Cable |
| Motor |
| Input Power Ratio |
2.7 kW |
| Cycles |
50 - 60Hz |
| Voltage |
220-240 V |
| Phases |
1 |
| Voltage |
220 - 240 V |
| Cutting equipment |
| Max cutting depth |
125 mm |
| Max. blade diameter |
350 mm |
| Inner diameter |
25,4 mm |
| Max. disc thickness |
5,6 mm |
| Max. perimeter speed |
100m/s |
| Coolant |
Wet / dry |
| Dimensions |
| Product length |
631 mm |
| Product width |
221 mm |
| Product height |
313 mm |
| Weight |
7.6 kg |
| Packing length |
740 mm |
| Packing width |
240 mm |
| Packing height |
340 mm |
| Gross weight of the article |
10.7 kg |
| Sound power level |
| Sound power level, guaranteed (LWA) |
105 dB(A) |
| Sound pressure level, at operator's ears |
95 dB(A) |
| Vibrations |
| Vibrations at left handle |
3.5 m/s2 |
| Vibrations on right handle |
3.5 m/s2 |
| Certification |
CB SE-89319 |
